Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Coupling hole spacing: 32 mm
Coupling thread: M6
&slash; inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
| Manufacturer | swiing® revival parts |
| Area of application | (Dis)assembly tool |
| Puch | E50 |
Accessories & related products
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material addition: Chrome steel (colloquially known as stainless steel) · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 369.10
Explore categories from Clutch
Moped fans also bought
Hot 
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material addition: Composite materials · Material: Aluminum · Material: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Area of application: Original · Area of application: Standard
EUR 61.40
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Area of application: Tuning
EUR 22.00
Hot
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8 · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool
EUR 12.20
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard
EUR 12.20
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.55
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
Hot
DMP clutch "Racing" aluminum reinforced | Puch E50
Thickness: 22 mm · Manufacturer: DMP · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 94 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 147.60
Working late? Evening hours on Thursday until 20:00
