Clutch puller with thread protection sleeve for your Puch Maxi moped / moped with E50 engine.
The galvanized steel clutch puller is easy to use and a must for every Puch workshop.
Use the cylinder screws to secure the tool to the clutch pack. By screwing in the large hexagon head screw, you can remove the entire clutch.
You can find clutches and springs in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Steel |
| Surface | blackened |
| Area of application | (Dis)assembly tool |
| Universal | |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Color: blue · Total length: 28 mm · Surface: coated · Area of application: Tuning
EUR 22.10
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 370.60
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Composite materials · Ø outside: 93 mm · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 21.2 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 518.90
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: red · Ø outside: 8.45 mm · Total length: 26.6 mm · Surface: coated · Ø inside: 4.3 mm · Number of components: 3 pcs
EUR 22.10
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Color: yellow · Total length: 26.9 mm · Surface: coated · Area of application: Tuning
EUR 22.10
swiing® ingenious screw M12x1.25 x 51 hexagonal ball end & cap
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Area of application: Workshop accessories · Drive: External hexagon · Screw head: Hexagon · Thread type: MF12x1.25 (fine pitch thread) · Surface: galvanized (blue) · Thread length: 42 mm · Width across flats: 19 mm · Number of components: 1 pcs
EUR 11.00
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Ø outside: 93 mm · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 61.70
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Color: blue · Total length: 28 mm · Surface: coated · Area of application: Tuning
EUR 22.10
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Surface: blackened · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 12.20
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 12.20
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
Collection only possible with online purchase and appointment.
