Centring bushes made of aluminium, red anodized, for clean installation of the cylinder cover on Puch X30 Velux mopeds / mopeds.
The bushes can be used on all 38 / 40 / 41 mm swinging cylinder heads in conjunction with M7 threaded stud bolts.
They are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for illustration).
We recommend that you glue the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
Now the cylinder head can be pushed perfectly centered onto the stud bolts.
Ø inside: 7.1 mm
Ø outside: 8 mm
Length: 17 mm
Material: aluminium, anodized
Corresponding cylinder heads, stud bolts, cylinder head gaskets, Loctite, etc. can be found in the accessories section.
Made by the quality brand swiing – swiss ingenious.
Details
| Manufacturer | swiing |
| Material | Aluminum |
| Nominal diameter inside | 7 mm |
| Ø outside | 8 mm |
| Ø inside | 7.1 mm |
| Total length | 17 mm |
Suitable for the following models
| Puch | Z50 (X30 Velux) |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Temperature resistance (min.): -75 - 150 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: green · Contents [ml]: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 26.90
EUR 2’690.00/l
Moped fans like you also bought:
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 61.30
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 28 mm · Ø inside: 25 mm · Total length: 380 mm · Number of fixing points: 2 pcs · Mounting type: Stud bolts & nuts · Hole spacing outlet: 42 mm
EUR 49.00
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Number of components: 4 pcs · Manufacturer: GPO · Area of application: Tuning · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.90
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Number of components: 4 pcs · Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Area of application: Tuning · Ø cylinder: 41 mm · Ø outlet inside: 27 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Hole spacing inlet: 32 mm · Hole spacing outlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 24.40
Collection only possible with online purchase and appointment.
