Cylinder & racing set
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: GPO · Material: Gray cast iron · Nominal diameter: 43 mm · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Area of application: Tuning · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Alternative version of the Pony OEM number: A1087 · Alternative version of the Sachs OEM number: 0213 142 000
EUR 270.60
BAD ASS 41 mm "Pandora" tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 276.80
AKOA wide wall 45 mm cylinder kit | Sachs 503 AB, AC, ADV
Nominal diameter: 45 mm · Manufacturer: AKOA · Area of application: Tuning · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Surface: varnished · Displacement: 70 ccm · Crankshaft stroke: 44 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø outlet inside: 29 mm · Ø Inlet inside: 23.5 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 50.5 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2868
EUR 369.10
swiing® ingenious 38 mm cylinder kit tuning diaphragm | Sachs 50/2 (CH)
Nominal diameter: 38 mm · Manufacturer: Meteor · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: Yes · Area of application: Tuning
EUR 190.60
AKOA wide wall 38 mm cylinder kit original | Sachs 503 AB, AC, ADV (A2868)
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Surface: varnished · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Outlet outside: 23 mm · Ø outlet inside: 11 mm · Ø outlet inside: 19.5 mm · Inlet window: 18x7 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 50.5 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Area of application: Standard · Hole spacing inlet: 36 mm · Pony OEM number: A2868
EUR 369.10
Airsal 43.5 mm cylinder kit incl. mounting parts | Sachs 504, 505, 508, 535
Nominal diameter: 43.5 mm · Manufacturer: Airsal · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 44 mm · Ø cylinder neck: 50 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 14 mm · Inlet window: 23.8 x 14.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56 (61) x 56 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: clamped · Decompressor: M10x1.5 · Hole spacing inlet: 31 mm
EUR 246.00
BAD ASS 41 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Camouflaged: No · Area of application: Tuning · Material: Gray cast iron · Surface: raw · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole spacing inlet: 31 mm
EUR 295.20
BAD ASS 43 mm "Pandora" BigBore tuning cylinder | Sachs 503, 50/2, 502
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 393.70
AKOA 38 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 221.40
swiing® ingenious 38 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 · Camouflaged: No · Area of application: Racing
EUR 270.60
BAD ASS 43 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Displacement: 61 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 31 mm
EUR 295.20
AKOA 38 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 38 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Number of fixing points: 4 pcs · Area of application: Tuning · Camouflaged: No
EUR 258.30
GPO 43 mm cylinder kit "Divertimento" (slotted) | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 43 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 61 ccm · Crankshaft stroke: 42 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 46 mm · Surface: blank / oiled · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Thread outlet: MF40x1.5 (fine pitch thread) · Decompressor: No · Camouflaged: Yes
EUR 215.20
AKOA wide wall 38 mm cylinder kit Sport | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Nominal diameter: 38 mm · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Surface: varnished · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø outlet inside: 29 mm · Ø Inlet inside: 23.5 mm · Hole spacing inlet: 36 mm · Area of application: Performance · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 50.5 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 56 x 56 · Decompressor: MF12x1.25 · Alternative version of the Pony OEM number: A2868
EUR 369.10
AKOA 43 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Hole spacing inlet: 32 mm · Area of application: Tuning · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No
EUR 282.90
AKOA 40 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Area of application: Tuning · Ø Inlet inside: 15.8 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No · Camouflaged: No
EUR 221.40
Hot 
swiing® ingenious 38 mm cylinder kit Racing fan-cooled | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 38 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
EUR 270.60
GPO 38 mm cylinder kit slotted | Sachs 50/2, 50/3, 50/4 fan-cooled (DE)
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 147.60
GPO 41 mm cylinder | Sachs 50/3, 50/4 (square inlet) fan-cooled (DE)
Nominal diameter: 41 mm · Manufacturer: GPO · Area of application: Tuning · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø Outlet outside: 40 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Cooling type: Fan air cooling · Hole spacing inlet: 31 mm
EUR 120.50
Athena 45 mm cylinder kit incl. mounting parts | Sachs (504), 505, 508
Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 44 mm · Nominal diameter: 45 mm · Ø cylinder neck: 51.7 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 19.5 mm · Ø Inlet inside: 14.3 mm · Ø piston pin (B): 12 mm · Inlet window: 23.4 x 12.6 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56 (61) x 56 · Number of fixing points: 4 pcs · Outlet type: clamped · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread) · Decompressor: M10x1.5 · Hole spacing inlet: 31.5 mm · Area of application: Tuning
EUR 369.10
AKOA 41 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 41 mm · Ø outside: 84 mm · Height: 29 mm · Area of application: Tuning · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5
EUR 73.70
AKOA 43 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 43 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Number of fixing points: 4 pcs · Area of application: Tuning · Camouflaged: No
EUR 332.20
AKOA 40 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 40 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 54 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Number of fixing points: 4 pcs · Area of application: Tuning · Camouflaged: No
EUR 258.30
Athena 48 mm cylinder kit | Sachs 503 AB, AC, ADV
Nominal diameter: 48 mm · Manufacturer: Athena · Camouflaged: No · Material: Aluminum · Displacement: 80 ccm · Crankshaft stroke: 43 mm · Surface: sandblasted · Ø Outlet outside: 26 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: clamped · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 430.60
GPO 41 mm "Wummer" cylinder kit (slotted) | Sachs 502, 50/2 (CH)
Manufacturer: GPO · Material: Gray cast iron · Nominal diameter: 41 mm · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44.8 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 30 mm · Inlet window: 18 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: Yes
EUR 196.80
AKOA 43 mm cylinder head for decovalve | Sachs 503 2AL, AAL, 2BL, ABL
Ø outside: 84 mm · Manufacturer: AKOA · Material: Aluminum · Ø cylinder: 43 mm · Height: 29 mm · Candle thread: short · Hole pattern [mm]: 37 x 37 · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: M10x1.5
EUR 73.70
BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Camouflaged: Yes · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Decompressor: No · Number of fixing points: 4 pcs · Area of application: Racing · Area of application: Tuning · Hole spacing inlet: 31 mm
EUR 406.00
BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 28 mm · Ø outlet inside: 28 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Decompressor: No · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning
EUR 566.00
GPO 38 mm cylinder kit diaphragm | Sachs 50/2, 50/3, 50/4 fan-cooled (DE)
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 67 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 175.90
Athena 38 mm cylinder kit (incl. mounting parts) | Sachs 504, 505, 508, 535
Nominal diameter: 38 mm · Manufacturer: Athena · Camouflaged: No · Material: Aluminum · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Surface: sandblasted · Ø cylinder neck: 51.7 mm · Ø outlet inside: 28 mm · Inlet window: 23.4 x 13 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56 (61) x 56 · Ø piston pin (B): 12 mm · Outlet type: clamped · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread) · Decompressor: M10x1.5 · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 31.5 mm
EUR 356.80
GPO 41 mm cylinder kit "Divertimento" (slotted) | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Hole spacing inlet: 31 mm · Ø cylinder neck: 46 mm · Surface: blank / oiled · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Thread outlet: MF40x1.5 (fine pitch thread) · Decompressor: No · Camouflaged: Yes
EUR 209.10
Athena 38 mm cylinder kit without mounting parts | Sachs 504, 505, 508, 535
Nominal diameter: 38 mm · Manufacturer: Athena · Camouflaged: No · Material: Aluminum · Displacement: 50 ccm · Crankshaft stroke: 44 mm · Surface: sandblasted · Ø cylinder neck: 51.7 mm · Ø outlet inside: 28.3 mm · Inlet window: 12.8 / 16.5 x 23.6 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 56/61 x 56 · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread) · Decompressor: M10x1.5 · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 32 mm
EUR 344.50
Athena 48 mm cylinder kit incl. diaphragm | Sachs (504), 505, 508, 535
Nominal diameter: 48 mm · Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 44 mm · Ø cylinder neck: 51.8 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.7 mm · Ø Inlet inside: 17.8 mm · Inlet window: 31.9 x 36.2 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 56/60 x 56 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: clamped · Outlet type: straight · Hole spacing outlet: 50 mm · Thread outlet: M8x1.25 (standard thread) · Decompressor: M10x1.5 · Hole spacing inlet: 32.5 mm
EUR 369.10
38 mm cylinder kit 30 km/h version | Sachs 504, 505, 535, (508)
Nominal diameter: 38 mm · Material: Aluminum · Displacement: 50 ccm · Ø cylinder neck: 49.4 mm · Ø cylinder neck: 51.9 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 22.5 mm · Inlet window: 18 x 13.4 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 55 x 55 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: straight · Decompressor: M10x1.5 · Hole spacing inlet: 31.5 mm
EUR 196.80
GPO 38 mm "Wummer" cylinder kit (slotted) | Sachs 502, 50/2 (CH)
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44.8 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 30 mm · Inlet window: 18 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: Yes
EUR 184.50
Parmakit 48 mm cylinder kit tuning | Sachs 50 S, 501, 50/4 EKF
Nominal diameter: 38 mm · Manufacturer: Parmakit · Camouflaged: No · Material: Aluminum · Displacement: 75 ccm · Surface: sandblasted · Ø piston pin (B): 14 mm · Outlet type: slanted · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 399.80
Power1 41 mm cylinder kit aluminum (square intake) | Sachs 50/3, 50/4 fan-cooled
Nominal diameter: 41 mm · Manufacturer: Power1 · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44 mm · Inlet window: 16 x 18 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 51 x 40 / 37 x 37 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole spacing inlet: 31 mm
EUR 196.80
Hot
Tivedens engine 41 mm cylinder kit S3 fan-cooled | Sachs 50/2 (DE), 50/3
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 31 mm
EUR 356.80
38 mm cylinder kit square inlet | Sachs 50/3, 50/4
Material: Gray cast iron · Surface: sandblasted · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Tuning
EUR 159.90
Athena 48 mm cylinder kit without mounting parts | Sachs (504), 505, 508
Material: Aluminum · Manufacturer: Athena · Surface: sandblasted · Nominal diameter: 48 mm · Crankshaft stroke: 44 mm · Ø cylinder neck: 51.6 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Decompressor: M10x1.5 · Camouflaged: No · Area of application: Tuning
EUR 344.50
Parmakit 38 mm cylinder kit tuning | Sachs 50 S, 501, 50/4 EKF
Nominal diameter: 38 mm · Manufacturer: Parmakit · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Displacement: 50 ccm · Ø piston pin (B): 14 mm · Number of fixing points: 4 pcs · Outlet type: slanted
EUR 362.90
42 mm cylinder kit | Sachs 5V
Nominal diameter: 42 mm · Material: Aluminum · Camouflaged: No · Crankshaft stroke: 42 mm · Surface: sandblasted · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 55 x 55 · Ø piston pin (B): 14 mm · Outlet type: slanted · Hole spacing outlet: 50 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 50 mm
EUR 356.80
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 31 mm
EUR 393.70
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole spacing inlet: 31 mm
EUR 356.80
Power1 38 mm cylinder kit aluminum (square intake) | Sachs 50/3, 50/4 fan-cooled
Nominal diameter: 38 mm · Manufacturer: Power1 · Camouflaged: No · Area of application: Tuning · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44 mm · Inlet window: 16 x 18 mm · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 51 x 40 / 37 x 37 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole spacing inlet: 31 mm
EUR 184.50
swiing® ingenious 41 mm cylinder kit tuning diaphragm | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 35 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Inlet window: 57.5 x 19 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 68 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: Yes · Area of application: Tuning
EUR 202.90
Not in stock
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Area of application: Tuning
EUR 221.40
Not in stock
Hot
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 37 x 37 · Camouflaged: No · Area of application: Racing
EUR 270.60
Not in stock
AKOA 41 mm cylinder kit "Power-Edition" | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Area of application: Tuning · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 40 x 60 / 37 x 37 · Decompressor: No
EUR 221.40
Not in stock
GPO 41 mm cylinder kit fan-cooled diaphragm | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 67 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Tuning
EUR 188.20
Not in stock
swiing® ingenious 41 mm cylinder kit | Sachs 50/3, 50/4 LKH (square inlet)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 / 37 x 37 · Camouflaged: No · Area of application: Tuning
EUR 159.90
Not in stock
AKOA 41 mm cylinder kit "Power-Edition" with head (selection) | Sachs 503 2AL, AAL, 2BL, ABL
Nominal diameter: 41 mm · Manufacturer: AKOA · Material: Aluminum · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.8 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped · Number of fixing points: 4 pcs · Area of application: Tuning · Camouflaged: No
EUR 258.30
Not in stock
Hot
swiing® ingenious 41 mm cylinder kit Racing fan-cooled | Sachs 50/2, 50/3, 50/4 (DE)
Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Racing
EUR 270.60
Not in stock
GPO 41 mm cylinder kit square inlet | Sachs 50/3, 50/4 LKH
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 51 x 40 · Camouflaged: No · Area of application: Tuning
EUR 188.20
Not in stock
38 mm cylinder kit 45 km/h version | Sachs (504), 505, 508, 535
Nominal diameter: 38 mm · Material: Aluminum · Displacement: 50 ccm · Ø cylinder neck: 44.4 mm · Ø cylinder neck: 52 mm · Ø Outlet outside: 25.9 mm · Ø outlet inside: 22.4 mm · Inlet window: 23.2 x 12.8 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 55 x 55 · Ø piston pin (B): 12 mm · Outlet type: straight · Decompressor: M10x1.5 · Number of fixing points: 4 pcs · Hole spacing inlet: 31.5 mm
EUR 246.00
Not in stock
swiing® ingenious 41 mm tuning set diaphragm | Sachs 50/2 (CH)
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Area of application: Tuning · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Hole pattern [mm]: 60 x 40 · Decompressor: No · Camouflaged: Yes
EUR 799.80
Not in stock
Page 1 of 2
Efficient tuning for your Sachs moped with a cylinder racing kit from legendary manufacturers
Do you want to get more out of your gem? Do you dream of getting more power out of your Sachs 503 moped and travelling much faster in the future? Would you also like smoother acceleration? Then the quickest and easiest way to achieve your goals is to fit a cylinder racing kit from our range. More displacement and specially refined surfaces for less friction make special tuning and racing cylinders the first choice if you really want to significantly increase the performance of your own bike. The racing kits from our range offer you everything you need to fit your new cylinder, from the piston ring to the cylinder head. So that you can turn your standard moped into a true racing machine, we have included high-quality racing kits and cylinder kits from well-known tuning companies in our range. DMP, Airsal, GPO and Malossi are just some of the illustrious manufacturers whose products are represented in our range. If you are looking for a customised racing kit for your Sachs 503 that you can use without having to make any adjustments, a tempting selection of high-performance cylinder racing kits awaits your order here.
Plug & play: Fitting cylinders or racing kits to your moped
Fitting a racing set is not as difficult as you might think as a beginner. However, you should definitely take enough time for this task and also work with concentration and absolute precision. Only then can you be sure that you will not suffer serious engine damage on your maiden voyage after fitting a cylinder kit to your Sachs moped. You should also bear in mind that racing kits are only ever "half the battle" on the way to a powerful bike. As a rule, you can only realise the full potential of a racing kit if, in addition to the cylinder, you also adapt the moped carburettor, the exhaust system and, ideally, the ignition to your Sachs moped. Of course, all components should also be harmonised with each other as much as possible. In addition to your Sachs 503 racing kit, you will therefore also find all other parts for the optimum tuning setup from legendary tuning forges such as Polini, Athena, Italkit, our own brand swiing and other notorious manufacturers.
High-quality and powerful tuning cylinders for your racing plane
Quality is essential for more power, performance and optimum reliability. That's why we rely on high-quality branded products from genuine tuning specialists. With a racing kit from Power1, Olympia, DR or Simonini, you are opting for optimum fitting accuracy and a brute increase in performance. The cylinders and cylinder kits from these manufacturers have already proven themselves thousands of times in practice. Thanks to the large selection of additional tuning parts for your Sachs moped, almost any desired setup can be realised. Of course, you will receive the hand-picked parts for your Sachs moped at an attractive price, just as you would expect.
Order custom-fit cylinder racing kits for your Sachs moped at a fair price online at mofakult
Fancy a really powerful Sachs moped? Then order a racing kit or a cylinder kit from Metrakit, Pinasco and other renowned manufacturers in our online shop today. This makes effective tuning for your moped child's play. A first-class Sachs 503 racing kit is not only available from us at an attractive price, but also directly from stock within a few days. So you can start wrenching on your moped soon. If you have any questions, simply contact us directly and drop us an e-mail or give us a call. We will be happy to advise you.
Our favorite manufacturers
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
