High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Total length | 940 mm |
| Manufacturer | AKOA |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Material | Steel |
| Surface | blank |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Ø Silencer: 60 mm · Ø outside: 95 mm · Total length: 830 mm · Ø Internal connection: 23 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 227.50
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Mounting type: Welded lug · Ø Silencer: 50 mm · Ø outside: 88 mm · Total length: 935 mm · Ø Internal connection: 24 mm · Number of fixing points: 1 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 362.90
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Mounting type: Tab · Ø Silencer: 50 mm · Ø outside: 88 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 350.60
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Manufacturer: AKOA · Material: Steel · Surface: blank · Mounting type: Nuts · Ø Silencer: 60 mm · Total length: 940 mm · Ø Internal connection: 28 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
EUR 418.30
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
EUR 9.10
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Number of fixing points: 4 pcs · Color: sand-colored · Material: Sealing paper · Number of components: 1 pcs · Ø inside: 106 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Number of fixing points: 4 pcs · Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Inlet window: 23 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 147.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
