Unique racing exhaust with offset silencer suitable for various Puch mopeds.
The exhaust is characterized by its very high-quality workmanship and is sometimes referred to as one of the most powerful racing exhausts for Puch racing mopeds.
The special feature of this Homoet model is that the center section is slightly longer, resulting in more power.
Ideal for cylinder kits between 38 and 42 mm. The tuning exhaust can only be fitted to cylinders with a straight outlet.
HOMOET DEMPER exhaust system made by hand in the Netherlands.
Details
| Manufacturer | HOMOET |
| Material | Steel |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Mounting type | Welded lug |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Material: Graphite / Graphite · Thickness: 3 mm · Manufacturer: swiing® ingenious parts · Place of use: Exhaust · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.95
Moped fans like you also bought:
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Color: Chrome · Color: black-matt · Ø outside: 130 mm · Hole spacing: 137.5 mm · Total length: 160 mm · Width: 150 mm · Height: 88 mm · Number of fixing points: 2 pcs
EUR 162.90
EUR 181.00
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
EUR 15.60
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Crank length (center-center): 156 mm · Wide intake: 28 mm · Total length: 180 mm · Thread type: FG14.3 (9/16" 20G) · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Color: Chrome
EUR 90.50
Not so nice 
Road Master 2.25 x 17" F-323 4.P.R. Allround
Manufacturer: Road Master · Tire width [inch]: 2.25 " · Color: black · Width [inch]: 2 1/4 · Old designation: 21 x 2.25 · Speed index: B = 50 km/h · Load capacity index: 39 = 136 kg · Profile type: F-323 4.P.R. · Tire type: Allround · White wall: No · Wheel size [inch]: 17 " · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 36.10
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Area of application: Standard · Number of components: 3 pcs · Drive: Outer edge · Thread type: MF10x1 (fine pitch thread) · Ø shaft: 9.8 mm · Width across flats SW: 13 mm · Ø External head: 14 mm · Width across flats SW: 17 mm · Shank: Yes · Shank length: 9.5 mm · Thread length: 13 mm · Total length: 32 mm
EUR 15.60
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Surface: galvanized (blue) · Material addition: Steel · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 229.30
Not in stock
Collection only possible with online purchase and appointment.
