Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing 85, 17, 18 carburettors.
These carburettors are installed on Puch X30 Sport, Puch Supermaxi LG1 & LG2, Sachs 503 ADV, as well as Sachs 504 / 535 mopeds.
The throttle cable guide tube has an M7 x 0.75 mm mounting thread.
You can find more carburetor elbows and throttle cables in the accessories section.
| Ø outside | 7 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | 85, 18 Catalyst |
| Height | 29 mm |
| Total length | 47 mm, 53.5 mm |
| Thread type | MF7x0.75 (fine pitch thread) |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Angle | 90 ° |
| Width across flats nut | 10 mm, 8 mm |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Ratings
Accessories & related products
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
EUR 2.85
EUR 2.50
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 52 mm · Height: 27 mm
EUR 14.20
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 50 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 36.5 mm · Total length: 42 mm · Height: 40 mm · Height: 48 mm
EUR 14.20
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 40 ° · Thread type: MF6x0.75 (fine pitch thread) · Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm
EUR 14.20
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Ø outside: 6 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
BING 90° carburetor pipe bend M7x0.75 NOS
Thread type: MF7x0.75 (fine pitch thread) · Manufacturer: BING · Height: 25 mm · Width across flats nut: 9 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 7 mm · Total length: 38 mm · Total length: 45 mm · Carburetor type: 85 · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 29.80
90° carburetor pipe bend M7x0.75
Width across flats nut: 8 mm · Width across flats nut: 10 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF7x0.75 (fine pitch thread) · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 7 mm · Total length: 47 mm · Total length: 53.5 mm · Internal thread: MF6x0.75 (fine pitch thread) · Height: 29 mm · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.20
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Height: 32 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
Moped fans also bought
Magura adjusting screw brake long
Manufacturer: Magura · Material: Brass · Color: silver · Drive: Knurled screw · Total length: 47 mm · Total length: 65 mm · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø External head: 9.1 mm · Ø shaft: 6 mm · Shank length: 11 mm · Thread length: 24 mm
EUR 4.65
- 12 %
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue)
EUR 2.85
EUR 2.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Ø outside: 5 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.40
GPO 85° carburetor pipe bend brass M6x0.75
Material: Brass · Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Height: 30 mm · Width across flats nut: 8 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.05
Magura cable clamp Ø 6 x 9
Drive: External hexagon · Drive: Slot · Manufacturer: Magura · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Material: Steel · Surface: blank · Surface: galvanized (blue) · Ø Cable bushing: 2.5 mm · Total length: 9 mm · Screw head: Hexagon · Number of components: 1 pcs · Ø outside: 6 mm · Width across flats: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 5 mm
EUR 2.40
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 40 mm · Total length: 49 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Height: 32 mm · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.25
Collection only possible with online purchase and appointment.
