Gas cable pipe bend set incl. cable adjusting screw and rubber cap suitable for various mopeds, mopeds and small motorcycles with Dell'Orto carburettors.
The gas cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found in the accessories section.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | nickel-plated |
| Thread type | MF6x0.75 (fine pitch thread) |
| Angle | 40 ° |
| Total length | 30.5 mm, 37.5 mm |
| Ø outside | 6 mm |
| Height | 57 mm, 67 mm |
| Internal thread | MF5x0.75 (fine pitch thread) |
| Width across flats nut | 7 mm |
Ratings
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 2.95
Dell'Orto 50° carburetor elbow set M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 50 ° · Total length: 36.5 mm · Total length: 42 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 40 mm · Height: 48 mm
EUR 14.60
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Height: 3 mm · Width across flats: 8 mm · Thread type: MF6x0.75 (fine pitch thread)
EUR 2.95
90° carburetor pipe bend M7x0.75
Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 7 mm · Carburetor type: 18 Catalyst · Carburetor type: 85 · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Height: 29 mm · Total length: 47 mm · Total length: 53.5 mm · Width across flats nut: 8 mm · Width across flats nut: 10 mm · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.60
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Total length: 40 mm · Total length: 49 mm · Height: 32 mm · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.45
Moped fans also bought
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 45.5 mm · Total length: 53.5 mm · Internal thread: M5x0.8 (standard thread) · Height: 30 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 7.25
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 52 mm · Height: 27 mm · Angle: 90 °
EUR 14.60
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Width across flats nut: 7 mm · Angle: 57 ° · Angle: 70 °
EUR 17.10
Dell'Orto 50° carburetor elbow set M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 50 ° · Total length: 36.5 mm · Total length: 42 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 40 mm · Height: 48 mm
EUR 14.60
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Material: Brass · Thread type: MF6x0.75 (fine pitch thread) · Total length: 43 mm · Total length: 50 mm · Ø outside: 6 mm · Height: 13 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 30 °
EUR 14.60
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Surface: nickel-plated · Width across flats nut: 8 mm · Height: 56 mm · Height: 61 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Total length: 34.5 mm · Total length: 42 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 45 °
EUR 8.45
Collection only possible with online purchase and appointment.
