Gas cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing carburettors.
The gas cable guide pipe has an M7 x 0.75 mm mounting thread.
Other carburettor bends and throttle cables can be found in the accessories section.
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
| Manufacturer | BING |
| Total length | 38 mm, 45 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | nickel-plated |
| Ø outside | 7 mm |
| Carburetor type | 85 |
| Height | 25 mm |
| Thread type | MF7x0.75 (fine pitch thread) |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Angle | 90 ° |
| Width across flats nut | 9 mm |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Ratings
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm · Thread type: MF6x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Height: 27 mm
EUR 14.60
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 36.5 mm · Total length: 42 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Height: 40 mm · Height: 48 mm · Angle: 50 °
EUR 14.60
Dell'Orto 40° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 30.5 mm · Total length: 37.5 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Width across flats nut: 7 mm · Height: 57 mm · Height: 67 mm · Angle: 40 °
EUR 14.60
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.45
90° carburetor pipe bend M7x0.75
Width across flats nut: 8 mm · Width across flats nut: 10 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 90 ° · Carburetor type: 18 Catalyst · Carburetor type: 85 · Ø outside: 7 mm · Height: 29 mm · Total length: 47 mm · Total length: 53.5 mm · Internal thread: MF6x0.75 (fine pitch thread) · Thread type: MF7x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 14.60
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Ø outside: 6 mm · Height: 32 mm · Total length: 40 mm · Total length: 49 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Width across flats nut: 7 mm · Width across flats nut: 8 mm
EUR 8.45
Moped fans also bought
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Width: 16 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 12.5 mm · Total length: 23.5 mm · Alternative version of the Pony OEM number: A4599 · Alternative version of the Sachs OEM number: 0962 089 000
EUR 5.50
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.95
OMG fuel filter metal 6 mm (removable)
Manufacturer: OMG · Material: Glass · Material: Metal · Filter type: Plastic net · Ø outside: 22 mm · demountable: Yes · Ø inside: 3.45 mm · Color: gray · Color: transparent · Color: white · Ø fuel hose connection: 5.6 mm · Ø fuel hose connection: 6 mm · Total length: 40 mm · Total length: 63 mm
EUR 8.35
BING 15 mm Bing original carburetor (1/15/46A)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Nominal diameter: 15 mm · Width: 50 mm · Choke control: Hand choke · Carburetor type: SRE · Height: 95 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 82 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 163.30
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRE · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
EUR 19.50
Collection only possible with online purchase and appointment.
