Replacement piston for the blown 41 mm cylinder with 12 mm piston pin and 2 pcs. 1.5 mm rectangular piston rings with flank lock (FS) suitable for Puch X30 Velux mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out more about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in technologically advanced wear protection with outstanding sliding properties. The piston is more durable and provides minimal additional performance compared to an original piston from Meteor.
The Meteor piston manufactured for swiing is characterized by its high-quality and precise fit.
Attention: We recommend a running clearance of 0.06-0.07 mm, the cylinder should therefore be honed to 41.01 mm.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
| Manufacturer | swiing |
| Surface | molybdenum-coated |
| Ø outside piston (A) | 40.95 mm |
| Compression height (C) | 22.5 mm |
| Curvature (D) | 3.5 mm |
| Total piston height (E) | 50 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 41 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Ø piston pin (B) | 12 mm |
| Piston weight | 94 g |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston weight: 85 g
EUR 61.20
Piston 41 mm (10 mm KoBo) | Puch X30 Velux, M50, MS50, VS50, DS50, VZ50
Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Compression height (C): 23.25 mm · Curvature (D): 3.65 mm · Total piston height (E): 49.35 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 10 mm · Piston weight: 85 g
EUR 61.20
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10.90
swiing piston 41 mm (10 mm KoBo) Racing | Puch X30 Velux fan-cooled
Manufacturer: swiing · Nominal diameter: 41 mm · Thick piston ring: 1.7 mm · Ø outside piston (A): 40.95 mm · Compression height (C): 22.5 mm · Curvature (D): 3.5 mm · Total piston height (E): 50 mm · Number of piston rings (F): 2 pcs · Surface: molybdenum-coated · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Ø piston pin (B): 10 mm · Piston weight: 93 g
EUR 85.70
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Total length: 180 mm · Color: Chrome · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 91.80
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Width: 50 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 98.00
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 10.90
swiing crankshaft High End | Puch X30 Velux (Z50)
Manufacturer: swiing · Material: Aluminum · Material: Steel · Cheek type: Full cheeks · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Number of gears: 2 pcs · Total length of crankpin on clutch side: 58 mm · Total length crankpin ignition side: 67 mm · Ø crank webs: 70 mm · Ø Connecting rod eye: 15 mm · Weight: 954 g · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 8 mm · Thread length: 13 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Length 1st paragraph: 20.3 mm · Length 2nd paragraph: 19 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
EUR 196.00
GPO 41 mm cylinder kit fan-cooled 12 mm KoBo | Puch X30 Velux, N-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Manufacturer: Meteor Racing · Manufacturer: swiing · Area of application: Tuning · Material: Gray cast iron · Displacement: 60 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 43.2 mm · Number of fixing points: 4 pcs · Ø outlet inside: 19.4 mm · Ø Inlet inside: 14.6 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 134.70
Not in stock
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Drive: Slot · Total length: 9.5 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5
EUR 4.30
Collection only possible with online purchase and appointment.
