profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
Carousel Image 5
logo_made-in-italy

For: Piaggio

22895

Side inlet CNC (38-43mm kit) | Piaggio Ciao, SI, Bravo, Boxer

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 246.00

Incl. 25.5% VAT.

Description

CNC machined side intake suitable for all Piaggio mopeds (Ciao, Si, Bravo, Boxer).

The intake was machined from a solid aluminum block. Top workmanship and of the highest quality.

Cylinder kits from 38 - 43 mm can be used.

Can be mounted on original and Polini Speed Engine cases. Not suitable for Polini and Malossi Evolution cases.
Similar reed valve systems from Polini or Malossi can be installed.

The frame must be slightly adapted so that the intake block can be fitted.

Common 6202 bearings can be installed.

A quality product manufactured in Italy.

ManufacturerMade in Italy
MaterialAluminum
Piaggio

Ciao - P , SC , PX , C24

Si

Bravo / Super Bravo

Boxer

Grillo

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

Ignition cable Ø 5 x 450 (original)

Universal

10167

Ignition cable Ø 5 x 450 (original)

Material: Copper · Material: Plastic · Color: black · Ø cable: 5 mm · Subcategory: Ignition cable · Suppressed: No · Total length: 450 mm

EUR 3.55

EUR 7.89/m

Valve caps Spike red

Universal

10485

Valve caps Spike red

Material: Aluminum · Surface: anodized · Color: red · Thread type: VG 8x32 (8x0.794 mm) · Width across flats: 10 mm

EUR 7.90

Polini intake system 4-folding diaphragm PHBG | Puch
undefined

For: Puch · Peugeot

10835

Polini intake system 4-folding diaphragm PHBG | Puch

Manufacturer: Polini · Mounting type: Screws · Number of flaps: 4 pcs · Ø outside: 24 mm · Ø inside: 19 mm · Hole pattern [mm]: 56 x 30 mm / 39 x 36 mm · Area of application: Tuning

EUR 98.30

NGK LB05F spark plug cap / 5 kΩ suppressed
undefined

Universal

16922

NGK LB05F spark plug cap / 5 kΩ suppressed

Manufacturer: NGK · Material: Plastic · Material: Rubber · Color: black · Ø cable: 5 mm · Spark plug socket: M4 · Cable available: No · Resistance: 5000 Ω · Subcategory: Spark plug connector · Suppressed: Yes

EUR 7.25

Polini CP 19 mm carburetor (hand choke)
undefined

Universal

17536

Polini CP 19 mm carburetor (hand choke)

Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: CP · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Height: 135 mm · Ø Air filter connection: 46 mm · Width: 66 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 35-12 · Camouflaged: No · Nozzle size: 66 · Size of secondary nozzle: 42 · Total length: 73.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 172.20

GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer
undefined

For: Piaggio

18863

GPO ignition coil CDI | Piaggio Ciao, SI, Bravo, Boxer

Manufacturer: GPO · Ø cable holder: 7.9 mm · Color: black · Place of use: External (outside the ignition) · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing: 33 mm · Ø mounting hole: 5.7 mm · Cable length: 192 mm · Height: 35.5 mm · Total length: 95 mm · Area of application: Original · Area of application: Performance · Area of application: Standard

EUR 49.10

EBR frame strut black | Piaggio Ciao PX
undefined

For: Piaggio

19219

EBR frame strut black | Piaggio Ciao PX

Manufacturer: EWC · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Total length: 550 - 570 mm

EUR 67.60

GPO 22 mm handlebar stem aluminum black (4-point attachment for fork plate handlebars)
undefined

For: Universal · Puch · Sachs · Piaggio

19428

GPO 22 mm handlebar stem aluminum black (4-point attachment for fork plate handlebars)

Manufacturer: GPO · Material: Aluminum · Material: Steel · Surface: powder-coated · Color: black · Clamping diameter: 22 mm · Drive: External hexagon · Number of fixing points: 4 pcs · Ø Stem: 22 mm · Width: 40 mm · Total length: 150 mm

EUR 29.40

Polini exhaust SP with aluminum silencer | Piaggio Ciao
undefined

For: Piaggio

19682

Polini exhaust SP with aluminum silencer | Piaggio Ciao

Manufacturer: Polini · Material: Steel · Surface: varnished · Mounting type: Welded lug · Number of fixing points: 2 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Snail · Flame tube attachment: Plug connection clamped

EUR 239.90

Inox
66HEROES License plate holder side left (CH version) Inox
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Zündapp Belmondo · Solex · Tomos · Bye Bike · Alpa Chopper / Turbo · Cilo · DKW · Fantic · Garelli · Honda · Hercules · ILO / JLO · Kreidler · Malaguti · MBK / Motobécane · Miele · --- PLEASE USE --- · Monark · Peugeot · Victoria · Yamaha · Zündapp

24807

66HEROES License plate holder side left (CH version) Inox

Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Mounting type: Screwed clamp · Number of fixing points: 1 pcs · Height: 29 mm · Width: 58 mm · Thread length: 10 mm · Total length: 110 mm

EUR 30.60