Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify the tuning of the carburetor and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 66
Side nozzle size: 42
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 19 mm |
| Manufacturer | Polini |
| Camouflaged | No |
| Component group Carburetor | Carburetor complete |
| Width | 66 mm |
| Carburetor type | CP |
| Height | 135 mm |
| Total length | 73.5 mm |
| Ø without reducing sleeve | 26 mm |
| Ø Internal connection | 24 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 46 mm |
| Material | Aluminum |
| Ø fuel hose connection | 7 mm, 6 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Mounting type | Plug connection clamped |
| Choke control | Hand choke |
| Area of application | Tuning, Racing, Performance, High End |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle block | 35-12 |
| Nozzle size | 66 |
| Size of secondary nozzle | 42 |
Accessories & related products
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Camouflaged: No · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5.2 mm · Ø inside: 19 mm · Ø outside: 24 mm · Mounting type: Screws · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs
EUR 172.20
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs
EUR 2.95
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Ø inside: 20.7 mm · Color: black-matt · Ø External connection: 26 mm · Hole spacing inlet: 38 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 36.80
Not in stock
Intake manifold 46 / 47 mm cylinder | Puch
Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Total height: 75 mm · Area of application: Tuning · Ø inside: 19 mm · Ø External connection: 24 mm · Total length: 60 mm · Hole spacing inlet: 38 mm · Height flange center hole: 65 mm · Camouflaged: No
EUR 49.10
Polini jet set (80 - 98) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Quantity: 10 pcs · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98
EUR 49.10
Polini jet set (60 - 78) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74 · Nozzle size: 76 · Nozzle size: 78
EUR 49.10
Polini 43.5 mm cylinder kit reed valve with head | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Camouflaged: No · Material: Aluminum · Displacement: 65 ccm · Surface: Nickel silicon carbide (colloquially known as Nikasil) · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Inlet window: 26 x 21 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs
EUR 492.10
Polini intake system 4-folding diaphragm "Big Valve" PHBG / CP carburetor | Puch
Manufacturer: Polini · Camouflaged: No · Material: Aluminum · Material: Plastic · Surface: glass bead blasted · Number of flaps: 4 pcs · Membrane material: Carbonite · Thick membrane platelets: 0.3 mm · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5.2 mm · Ø inside: 19 mm · Ø outside: 24 mm · Mounting type: Screws · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs
EUR 172.20
Working late? Evening hours on Thursday until 20:00
