Selettra internal rotor magneto mounting for left-hand and right-hand engines with Ø 90 mm ignition plate mount.
The ignition system can be mounted on various mopeds, mopeds and small motorcycles such as Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 NG-2AH, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler etc.
Type number: 034-IG-14, P3356
System: NO2019
Adjustment angle: 3°
Direction of rotation: Left & Right
Light connection: No
Number of turns: 2400
Rotor weight: 352 grams
Rotor keyway: 2.1 mm
Rotor speed: 300 - 27000 rpm
Plug type: Superseal
Basic adjustment of the ignition: Set the crankshaft to 15 - 20° before TDC (top dead center), the markings must then match.
Corresponding attachments such as stator, rotor, complete ignitions, adjustment tools, additional weights etc. can be found in the accessories section.
Quality product from the Italian manufacturer Selettra.
Manufacturer: Selettra · Color: red · Number of cables: 2 pcs · Area of application: Tuning
Manufacturer: Selettra · Direction of rotation: left, right · Cone ratio: 1:5 · Ø Flywheel outside: 58 mm · Weight: 352 g
Manufacturer: Selettra · Place of use: External (outside the ignition) · Ø cable holder: 7 mm · Color: red · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 6.5 mm · Area of application: Performance
| Manufacturer | Selettra |
| Weight | 352 g |
| Direction of rotation | left, right |
| Ø cable | 7 mm |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Ø outside: 65 mm · Thickness: 4 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 3 pcs
EUR 23.90
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 87 g · Ø outside: 65 mm · Thickness: 4 mm · Ø inside: 24.5 mm · Number of fixing points: 3 pcs
EUR 22.20
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Weight: 110 g · Material: Steel · Surface: galvanized (blue) · Ø bolt circle: 50 mm · Ø inside: 24.5 mm · Ø outside: 65 mm · Thickness: 9 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm
EUR 45.20
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Material: Aluminum · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Width: 50 mm · Ø Internal connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Clamping screw torque (max.): 4 N/m
EUR 80.40
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple length: 5 mm · Number of components: 1 pcs
EUR 2.95
swiing® revival 38 mm gasket set tuning cylinder | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2 mm · Area of application: Standard · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 12.30
Collection only possible with online purchase and appointment.
