The legendary full cheek crankshaft suitable for mopeds / mopeds with Sachs 50/3 engines (not to be confused with 503 engines), which have L17 crankshaft bearings.
High-quality, precision-fit crankshaft weighing 1062 grams, which has proven itself in various load tests.
This crankshaft was designed for use in engines with a large increase in performance.
All balancing holes in the cheeks have been sealed with aluminum inserts for maximum pre-compression.
The solid connecting rod is equipped with a more stable 16 mm connecting rod pin, which is hollow on the inside for better balancing.
Dimension:
- Total length of clutch-side cheek pin: 43 mm
- Total length of clutch-side cheek pin: 69.9 mm
- Ø 1st shoulder (clutch-side): 17 mm
- Ø 2nd shoulder (clutch side): 12 mm
- Thread on coupling side: MF10x1 mm
- Ø Heel (coupling side): 17 mm
- Thread on the Zünd side: MF10x1 mm
- Ø crank webs: 85 mm
- Width of crank webs: 30.1 mm
- Ø connecting rod eye top: 15 mm
- Ø connecting rod pin bottom: 16 mm
- Conrod length: 85 mm
- Stroke: 42 mm
- Weight (incl. Connecting rod): 1062 grams
The needle bearing (12/15 x14.7 mm) is included in the scope of delivery.
You can find the matching bearings and oil seals in the accessories section.
Installation tip:The transition between the crank webs and cheek pins is provided with a slight radius for reinforcement. To ensure clean spacing, the first spacer washer should be provided with a slight chamfer on the left and right. This then lies neatly over the chamfer and centers itself perfectly. The other spacers can be used as normal.
You can find spacers and the matching bearings in the accessories section.
Quality product from the Portuguese manufacturer Rito.
Details
| Manufacturer | Rito |
| Material | Steel, Aluminum |
| Cheek type | Full cheeks |
| Crankshaft stroke | 42 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Connecting rod length center-center | 85 mm |
| Total length of crankpin on clutch side | 43 mm |
| Total length crankpin ignition side | 69.9 mm |
| Ø crank webs | 85 mm |
| Ø Connecting rod eye | 15 mm |
| Ø piston pin (B) | 12 mm |
| Weight | 1062 g |
| Dimension needle bearing | 12 / 15 x 14.7 mm (axe 12) |
| Wide crank webs | 30.1 mm |
| Length 1st paragraph | 17 mm |
| Length 2nd paragraph | 12 mm |
| Area of application | Tuning, Racing |
Suitable for the following models
| Sachs | 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Number of components: 1 pcs · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm
EUR 53.90
Shaft seal set 3 & 4-speed kickstarter | Sachs
Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 4.5 mm · Width: 7 mm · Ø outside: 16 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 30 mm · Ø outside: 31.5 mm · Ø inside: 10 mm · Ø inside: 13.8 mm · Ø inside: 14.96 mm · Ø inside: 15 mm · Ø inside: 17 mm
EUR 40.40
swiing crankshaft High End (Version 2.0) | Sachs 503 2AL, 2BL
Manufacturer: swiing · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Area of application: High End · Area of application: Racing · Area of application: Tuning · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Number of gears: 2 pcs · Total length of crankpin on clutch side: 43.5 mm · Total length crankpin ignition side: 63.4 mm · Ø crank webs: 85 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread length: 8 mm · Thread length: 11 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 30.1 mm · Length 1st paragraph: 21 mm · Length 2nd paragraph: 13 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 12 mm · Length of shoulder (ignition side): 35 mm
EUR 227.00
Not in stock
Hot 
swiing crankshaft High End (Version 2.0) | Sachs 50/2, 50/3
Manufacturer: swiing · Cheek type: Full cheeks · Area of application: High End · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 40.7 mm · Total length crankpin ignition side: 63.4 mm · Ø crank webs: 85 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 15 mm · Weight: 1038 g · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 30.1 mm
EUR 227.00
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
NSK L17 shoulder ball bearing
Material: Brass · Manufacturer: NSK · Material: Steel · Surface: blank / oiled · Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Bearing clearance: CN (standard) · Stock number: L17 · Bearing type: Shoulder bearing · Width: 10 mm · Ø inside: 17 mm · Ø outside: 40 mm · Ball bearing closed: No · Area of application: Standard
EUR 24.00
Shaft seal set 3 & 4-speed kickstarter | Sachs
Width: 2.5 mm · Width: 3.5 mm · Width: 4 mm · Width: 4.5 mm · Width: 7 mm · Ø outside: 16 mm · Ø outside: 19 mm · Ø outside: 24 mm · Ø outside: 30 mm · Ø outside: 31.5 mm · Ø inside: 10 mm · Ø inside: 13.8 mm · Ø inside: 14.96 mm · Ø inside: 15 mm · Ø inside: 17 mm
EUR 40.40
Meteor Racing piston 38 mm | Sachs 50/2 & 503
Manufacturer: Meteor Racing · Surface: molybdenum-coated · Nominal diameter: 38 mm · Thick piston ring: 1.6 mm · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Piston weight: 79 g
EUR 79.70
Collection only possible with online purchase and appointment.
