Stylish LED backlight for custom conversions.
The housing is made of plastic.
The light is attached using a Ø 4.9 mm screw.
Ø: 30.6 mm
Length: 14 mm
Cable length: 40 cm
12V6W
Cable assignment:
Ground: black
Rücklight: yellow
Brake light: red
| Width | 30.6 mm |
| Material | Plastic |
| Color | black |
| Bulb holder | LED (permanently installed) |
| Test mark | E1 |
| Brake light | Yes |
| Reflectors | No |
| Battery operated | No |
| Mounting type | Nuts & bolts |
| Depth | 14 mm |
| Number of fixing points | 1 pcs |
Accessories & related products
GPO light coil 6/12V - 15/25W
Manufacturer: GPO · Hole spacing: 55 mm · Ø mounting hole: 4.7 mm · Area of application: Standard · Tension: 6 V · Tension: 12 V · Performance: 15 W · Performance: 25 W · Ø Internal flywheel: 90 mm · Height: 22 mm · Total length: 76.5 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Alternative version of the Pony OEM number: A2110 · Alternative version of the Sachs OEM number: 0265 113 004
EUR 24.40
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Color: blue · Total length: 28 mm · Number of components: 3 pcs
EUR 22.00
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Surface: chrome-plated · Surface: varnished · Housing material: Metal · Area of application: Standard · Thread size: M6 · Lens material: Plastic · Ø outside: 130 mm · Bulb holder: BA15d · Number of fixing points: 2 pcs · Speedometer recording: None · Switch included: No · Battery operated: No · Mounting type: Screws · Depth: 80 mm · Width: 134 mm · Height: 147 mm · Color: Chrome · Color: black · Color: transparent
EUR 30.50
Not in stock
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: PHBG CS · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Color: black · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Width: 70 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Height: 124 mm · Total length: 82 mm · Mounting type: Plug connection clamped · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 147.00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs
EUR 3.45
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.10
Collection only possible with online purchase and appointment.
