Racing air filter with foam and plastic cap for your moped, moped and small motorcycle.
This racing air filter is particularly suitable for cross racing as it protects against rain and dirt. The well-placed intake openings ensure optimum air supply.
The air filter is clamped to the carburettor using a clamp.
Ø Carburettor connection: 32 mm
Connection angle: 90°
Total length: 140 mm
Quality product from the Italian manufacturer Polini.
| Manufacturer | Polini |
| Camouflaged | No |
| Color | black, blue |
| Filter type | Foam |
| Total length | 140 mm |
| Ø Internal connection | 32 mm |
| Angle | 90 ° |
| Area of application | Tuning |
| Mounting type | Plug connection clamped |
Accessories & related products
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm conical / straight
Manufacturer: Polini · Material: Foam · Camouflaged: No · Material: Rubber · Area of application: Tuning · Filter type: Foam · Total length: 140 mm · Color: black · Color: blue · Length rubber part: 13 mm · Height: 100 mm · Length of filter section: 127 mm · Width: 150 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp
EUR 73.70
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm cylindrical / angled
Manufacturer: Polini · Material: Foam · Camouflaged: No · Material: Rubber · Angle: 75 ° · Filter type: Foam · Ø outside: 95 mm · Total length: 100 mm · Length rubber part: 11.3 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 46 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Color: blue · Color: gray · Length of filter section: 60 mm · Length of filter section: 85 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Area of application: Tuning
EUR 73.70
Explore categories from Carburetor & intake system
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 12.20
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Color: black · Mounting type: Plug connection clamped · Carburetor type: PHBG CS · Total length: 82 mm · Nominal diameter: 19 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Height: 124 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Width: 70 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 147.60
Inox
Hot 
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Total length: 360 mm · Color: Chrome · Thread size: M8 · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Thread type: M8x1.25 (standard thread)
EUR 34.30
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 25.70
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 25.70
AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
Manufacturer: AKOA · Material: Plastic · Ø inside: 20.7 mm · Ø External connection: 26 mm · Color: black-matt · Hole spacing inlet: 38 mm · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 2 pcs
EUR 36.80
Not in stock
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
Working late? Evening hours on Thursday until 20:00
