Aluminum cover plate for the reed valve inlet of the 47 mm Gilardoni italkit Puch cylinder kit.
The reed valve cover is used to close the reed valve system and convert the cylinder kit to a housing inlet (GME).
Outer dimensions: 72.5 x 48 mm
Hole pattern: 60 x 35 mm
Material thickness: 8 mm
Material: aluminum
You can find corresponding additional material such as seals, sealing compound etc. in the accessories section.
| Manufacturer | MBR |
| Material | Aluminum |
| Width | 48 mm |
| Total length | 72.5 mm |
| Thickness | 8 mm |
| Mounting type | Screws |
| Hole pattern [mm] | 60 x 35 mm |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Puch |
Accessories & related products
Gilardoni italkit 47 mm Cylinder Kit (without head) | Puch E50 / Z50 / ZA50
Manufacturer: Gilardoni italkit · Camouflaged: No · Surface: sandblasted · Displacement: 75 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø Inlet inside: 18.3 mm · Ø outlet inside: 26.5 mm · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Inlet window: 38.5 x 25.8 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 258.30
Not in stock
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Color: red · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 28.20
EUR 402.86/l
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Surface: blackened · Material: Steel · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 12.20
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Color: silver · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.30
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Surface: nickel-plated · Material: Brass · Material: Steel · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Thread length: 4 mm
EUR 2.45
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Surface: varnished · Color: red · Color: white · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Material: Steel · Total length: 370 mm · Height: 340 mm · Width: 245 mm · Material thickness: 3.5 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket
EUR 92.20
Hot
swiing® ingenious Cable-Pull Starter for MVT Ignition | Puch E50
Surface: chrome-plated · Surface: raw · Ø outside: 130 mm · Width: 150 mm · Color: Chrome · Color: black-matt · Manufacturer: swiing® ingenious parts · Total length: 170 mm · Height: 82 mm · Material: Plastic · Material: Steel · Ignition system: MVT Allumage · Number of fixing points: 2 pcs · Hole spacing: 138 mm
EUR 184.50
Working late? Evening hours on Thursday until 20:00
