Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Spring design | Tension spring |
| Manufacturer | Malossi |
| Area of application | Tuning |
| Material | Spring steel |
| Color | white, yellow, red |
| Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
| Total length | 32.6 mm |
| Surface | varnished |
| Puch | E50 |
| Tomos |
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Ø outside: 92.5 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 19 mm
EUR 232.80
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Tomos OEM number: 227849
EUR 232.80
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Number of teeth: 45 pcs · Ø inside: 94 mm · Surface: powder-coated · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs
EUR 24.40
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Component group Carburetor: Carburetor complete · Color: gray · Nominal diameter: 12 mm · Carburetor type: SRE · Width: 50 mm · Choke control: Hand choke · Height: 108 mm · Total length: 65 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m
EUR 85.70
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outside: 116 mm · Number of components: 1 pcs · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.80
swiing® ingenious pull starter | Puch E50 MVT ignition
Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ø outside: 130 mm · Ignition system: MVT Allumage · Width: 150 mm · Height: 82 mm · Color: Chrome · Color: black-matt · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 183.70
Not in stock
Collection only possible with online purchase and appointment.
