Hot 
Complete Malossi MHR high-end torque converter unit including Vario for Piaggio mopeds / mopeds.
Selected high-quality materials make this torque converter and clutch set an extremely durable and hard-wearing drivetrain, which is mainly used in the high-end tuning sector.
The following parts are included in the scope of delivery:
- Mainshaft for the gearbox with splines on the clutch mount and 11 teeth (incl. nut, bearing and oil seal). nut, bearing and oil seal)
- Torque driver pulley system with 2 different pitches
- Fly clutch with Ø 107 mm and double-D mount
- Wing clutch bell with Ø 107 mm and extra cooling ribs
- Red counter-pressure spring: with silicon alloyed steel, 45 kg
- Malossi Multivar Variomat with 6 g weights
The input shaft for the gearbox fits the following (straight-toothed) gear ratios:
- Malossi 8.93 / 1
- Piaggio 12.27 / 1
- Piaggio 12.50 / 1
- Malossi HTQ 12.82 / 1
- Piaggio 16.02 / 1
Note: On Ciao models, the pulleys must be turned off or the frame must be removed. In addition, as with installation on a Grillo or Bravo, a shorter belt from the scooter range must be used.
There is no longer a starter clutch. The engine must therefore be started with a pull-wire starter, side shifters can no longer be fitted.
A detailed installation manual with pictures is included.
The clutch is not compatible with standard parts of the common torque converter units.
The two matching Malossi gearboxes as well as a matching timing belt can be found in the accessories section along with other parts.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Number of weights | 6 pcs |
| Weight Standard weights | 6 g |
| Ø Weights | 13 mm |
| Length Weights | 16 mm |
| Ø External variator | 102 mm |
| Gearbox type | Vario |
| Piaggio | Si |
Accessories & related products
swiing® ingenious rear wheel nut M14 x 1.5 SW19 Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Thread type: MF14x1.5 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 14 mm · Width across flats: 19 mm · Height: 24 mm
EUR 16.40
swiing® ingenious nut M8 crankshaft / Variomat | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Thread type: M8x1.25 (standard thread) · Surface: galvanized (blue) · Drive: External hexagon · Nominal diameter (thread): 8 mm · Width across flats: 24 mm · Height: 6 mm
EUR 10.60
Explore categories from Variomatic belt drive
Moped fans also bought
- 10 %
Hot
BERU spark plug connector 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Subcategory: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
EUR 9.75
Nut flywheel M10x1 SW15 serrated
Ø outside: 19.8 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Drive: External hexagon · Nominal diameter (thread): 10 mm · Height: 10.5 mm · Thread type: MF10x1 (fine pitch thread) · Width across flats: 15 mm · Area of application: Standard
EUR 3.55
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
