Four diaphragm plates made of black carbonite for your moped / moped such as Alpa Turbo / Chopper, Malaguti Fifty with a Franco Morini M01, as well as Fantic Issimo & Yamaha mopeds with the Minarelli V1 engine.
The set with diaphragm plates includes two different thicknesses.
2 pcs. with 0.3 mm
2 pcs. with 0.35 mm
Ø holes: 3 mm
Hole spacing: 8 mm
Dimension (l x w): 38 x 20 mm
You can find the matching reed block in the accessories section.
Quality product from the Italian manufacturer Malossi.
| Manufacturer | Malossi |
| Area of application | Tuning |
| Material | Carbonite |
| Membrane material | Carbonite |
| Thick membrane platelets | 0.3 mm, 0.35 mm |
| Total length | 38 mm |
| Mounting type | Screws |
| Width | 20 mm |
| Ø mounting hole | 3 mm |
| Hole spacing | 8 mm |
| Number of fixing points | 2 pcs |
| Alpa Chopper / Turbo | |
| Fantic | |
| Malaguti | |
| Yamaha |
Accessories & related products
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Carburetor type: PHBG CS · Color: black · Nominal diameter: 19 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Total length: 82 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø Internal connection: 24 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Mixed oil connection: Yes · Height: 124 mm · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 147.00
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Area of application: Standard · Number of components: 1 pcs · Cable length: 2200 mm
EUR 2.95
Athena 45 mm cylinder kit incl. diaphragm | Puch
Surface: sandblasted · Nominal diameter: 45 mm · Manufacturer: Athena · Camouflaged: No · Material: Aluminum · Displacement: 70 ccm · Area of application: Tuning · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24 mm · Ø Inlet inside: 20.5 mm · Hole spacing inlet: 31.5 mm · Inlet window: 22 x 27.5 · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Number of fixing points: 4 pcs
EUR 318.60
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Area of application: Standard · Number of components: 1 pcs · Cable length: 2250 mm · Piaggio OEM number: 270460
EUR 2.95
Collection only possible with online purchase and appointment.
