License Plate Holder for Your Moped, Scooter, and Small Motorcycle.
Anyone who owns more than one moped—and isn’t zooming around on two at once like Jean-Claude Van Damme—should definitely get this handy interchangeable license plate holder. It lets you switch the same license plate from one moped to the next in seconds. This saves time and money.
The license plate holder system stands out for its ingenious yet simple design.
The spring-loaded plate is either attached directly to the license plate using the M5 cam or to a license plate frame, as listed in the accessories.
The black anodized aluminum block with the corresponding milled slots is mounted directly to the moped frame.
With light pressure and a little momentum, the license plate slides effortlessly into the locking position. It holds rock-solid—even in snow, rain, and strong gusts of wind.
Scope of delivery as shown in Figure 1.
Figures 3 & 4 illustrate the mounted license plate holder.
This table provides an overview of how many mopeds can be registered with a license plate in the respective cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell Ausserrhoden | 1 |
| Appenzell Innerrhoden | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Fribourg | unlimited |
| Geneva | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Vaud | 2 |
| Valais | unlimited |
| Zug | 19 |
| Zurich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the interchangeable number plate holder in detail:
| Spring design | Leaf spring |
| Manufacturer | 66HEROES |
| Material | Spring steel |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | Issimo |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | Flory MF / MP Foil |
| Malaguti | |
| MBK / Motobécane | |
| Miele | |
| Suzuki | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 13.40
License plate holder (with frame) Inox (CH version)
Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Height: 7 mm · Ø mounting hole: 5 mm · Width: 103 mm · Mounting type: Nuts & bolts · Total length: 143 mm · Number of fixing points: 3 pcs
EUR 16.60
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Area of application: Chemistry · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Thread type: M5x0.8 (standard thread) · Color: black-matt · Surface: varnished · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 5 mm · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs
EUR 15.90
Not in stock
66HEROES spring washer & M4 cam number holder Inox
Manufacturer: 66HEROES · Thread type: M4x0.7 (standard thread) · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 4.5 mm · Thread length: 12 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 16.90
Explore categories from Number holder
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Height: 5.3 mm · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Thread length: 8 mm · Number of fixing points: 2 pcs
EUR 13.40
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
License plate holder (with frame) Inox (CH version)
Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Height: 7 mm · Ø mounting hole: 5 mm · Width: 103 mm · Mounting type: Nuts & bolts · Total length: 143 mm · Number of fixing points: 3 pcs
EUR 16.60
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread size: M8 · Surface: chrome-plated · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Thread type: M8x1.25 (standard thread) · Mirror rod length: 300 mm · Test mark: none · Clamping diameter: 22 mm · Total length: 360 mm
EUR 34.30
Working late? Evening hours on Thursday until 20:00
