Number plate holder made of stainless steel with a classy black finish for your Swiss number plate.
To protect your shins, the edges of this machined number frame are cleanly deburred.
You can mount your license plate neatly on this simple but stylish number holder.
Two stop nuts and four washers made of chrome steel (commonly known as stainless steel) are included in the scope of delivery.
You can find matching add-on parts for this license plate holder in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Total length | 147 mm |
| Thread type | M5x0.8 (standard thread) |
| Width | 105 mm |
| Height | 6 mm |
| Number of fixing points | 6 pcs |
| Ø mounting hole | 5 mm |
| Mounting type | Nuts & bolts |
| Color | black-matt |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Piaggio |
| Zündapp Belmondo |
| Solex |
| Tomos |
| Bye Bike |
| Alpa Chopper / Turbo |
| Cilo |
| DKW |
| Fantic |
| Garelli |
| Honda |
| Hercules |
| ILO / JLO |
| Kreidler |
| Malaguti |
| MBK / Motobécane |
| Miele |
| --- PLEASE USE --- |
| Monark |
| Peugeot |
| Victoria |
| Yamaha |
| Zündapp |
| Franco Morini |
| KTM |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Width: 105 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts
EUR 13.40
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Total length: 110 mm · Width: 58 mm · Mounting type: Screwed clamp · Thread length: 10 mm · Height: 29 mm · Number of fixing points: 1 pcs
EUR 30.60
Kraftwerk 1/4" socket set 26 pcs.
Manufacturer: Kraftwerk · Material: Chrome vanadium · Area of application: Workshop accessories · Drive: Cross recess · Drive: Slot · Drive: Torx · Drive: 1/4" (6.3 mm) · Total length: 170 mm · Width: 90 mm · Height: 35 mm · Number of components: 26 pcs
EUR 49.10
Not in stock
Explore categories from Number holder
Moped fans also bought
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 12.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Total length: 6 mm · Ø outside: 5 mm · Screw head: Lens head
EUR 2.45
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Color: silver · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.90
Hot
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 12.20
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
