Interchangeable number holder for your moped, moped and small motorcycle.
Everyone who owns more than one moped and doesn't ride around on two at the same time like Jean-Claude Van Damme should get this practical interchangeable number holder.
This means that the same number can be changed from one moped to the next in a matter of seconds. This saves time and money.
The number holder system impresses with its sophisticated yet simple functionality.
The spring plate is either attached directly to the license plate frame with the two M4 cams and the M4x12 mm countersunk screws.
The black anodized aluminium block with the corresponding recesses is mounted directly on the moped frame.
With light pressure and a little momentum, the number is pushed smoothly into the locking position. This holds firmly, even in snow, rain and strong winds.
Scope of delivery as shown in Figure 1.
Figures 3 & 4 illustrate the mounted number holder.
Further parts for the number holder system can be found in the accessories section.
This table gives you an overview of how many mopeds can be mounted on a license plate in the relevant cantons of Switzerland and Liechtenstein.
| Aargau | 19 |
| Appenzell A.-Rh. | 1 |
| Appenzell I.-Rh. | 5 |
| Basel-Landschaft | 99 |
| Basel-City | 99 |
| Bern | unlimited |
| Freiburg | unlimited |
| Genève | 2 |
| Glarus | 1 |
| Graubünden | unlimited |
| Jura | unlimited |
| Liechtenstein | 2 |
| Lucerne | 99 |
| Neuchâtel | 2 |
| Nidwalden | 30 |
| Obwalden | 30 |
| Schaffhausen | 50 |
| Schwyz | unlimited |
| Solothurn | unlimited |
| St. Gallen | unlimited |
| Ticino | unlimited |
| Thurgau | unlimited |
| Uri | 1 |
| Waadt | 2 |
| Wallis | unlimited |
| Zug | 19 |
| Zürich | 19 |
Excellent quality from the premium custom brand 66HEROES.
The following video explains the details and installation of the replacement number holder in detail:
| Manufacturer | 66HEROES |
| Material | Chrome steel (colloquially known as stainless steel) |
| Mounting type | Nuts & bolts |
| Ø mounting hole | 4.5 mm |
| Thread type | M4x0.7 (standard thread) |
| Thread length | 12 mm |
| Number of fixing points | 2 pcs |
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Solex | |
| Tomos | |
| Bye Bike | |
| Alpa Chopper / Turbo |
| Cilo | |
| DKW | |
| Fantic | |
| Garelli | |
| Honda | |
| Hercules | |
| ILO / JLO | |
| Kreidler | |
| Malaguti | |
| MBK / Motobécane | |
| Miele | |
| --- PLEASE USE --- | |
| Monark | |
| Peugeot | |
| Victoria | |
| Yamaha | |
| Zündapp | |
| Franco Morini |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black · Width: 111 mm · Hole spacing: 50 mm · Height: 153 mm · Total length: 7 mm · Thread type: M4x0.7 (standard thread) · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts
EUR 49.10
66HEROES Custom chrome number frame (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: chrome-plated · Color: Chrome · Total length: 153 mm · Thread type: M4x0.7 (standard thread) · Width: 111 mm · Height: 7.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 50 mm · Ø mounting hole: 5.2 mm
EUR 49.10
66HEROES interchangeable number holder set
Manufacturer: 66HEROES · Material: Aluminum · Material: Spring steel · Surface: brushed · Surface: electropolished · Color: black · Thread type: M5x0.8 (standard thread) · Mounting type: Bayonet lock · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 36.80
Explore categories from Number holder
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
EUR 15.40
Not so nice 
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
EUR 24.50
GPO chain tensioner | Puch Maxi S
Total length: 175 mm · Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
EUR 12.20
License plate holder (with frame) Inox (CH version)
Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 143 mm · Width: 103 mm · Height: 7 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Ø mounting hole: 5 mm
EUR 16.60
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 27.00
EUR 2’700.00/l
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
