Vintage grip set made of black rubber for your moped, moped and small motorcycle with automatic transmission.
Thanks to their shape and appealing design, these handlebar grips adapt perfectly to your hands and provide a pleasant riding experience. These grips give your retro and classic bike the finishing touch.
One set consists of one grip cover each with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, this item must be ordered twice. The handle ends are closed except for a small hole, but can be opened individually if required (e.g. for mounting a side mirror).
Total length: 123 mm
Ø outside (operating surface): 33 - 39 mm
For easier installation, the rubber grips can be placed in warm water or sprayed on the inside with GPO Grip Spray. If you dare, you can also use mummy's hairspray.
Mounting material for the grip covers, as well as other rubber grips and complete grip sets can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Ø inside | 22 mm, 24 mm |
| Manufacturer | 66HEROES |
| Material | Rubber |
| Surface | raw |
| Color | black |
| Ø outside | 33 mm, 39 mm |
| Total length | 123 mm |
Accessories & related products
Lusito handle set automatic aluminum black (short gas)
Surface: powder-coated · Manufacturer: Lusito · Material: Rubber · Housing material: Aluminum · Color: black · Color: orange · Color: silver · Number of components: 6 pcs · Material lever: Aluminum · Total length: 130 mm · Total length: 150 mm · Ø inside: 22 mm · Ø inside: 24 mm
EUR 61.40
Explore categories from Handles & fittings
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Material: Steel · Color: Chrome · Ø outside: 59 mm · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Flame tube attachment: Flange · Number of fixing points: 4 pcs
EUR 166.00
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 15.40
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Height: 5.3 mm · Total length: 145 mm · Width: 105 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Color: silver
EUR 13.40
GPO 15 mm carburetor tuning | Puch
Width: 50 mm · Manufacturer: GPO · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 79.90
GPO license plate holder Inox black (CH version)
Surface: varnished · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: black-matt · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Height: 6 mm · Total length: 147 mm · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs
EUR 15.90
Not in stock
Working late? Evening hours on Thursday until 20:00
