This gas-nitrided washer is used for the brake anchor plate on your Sachs moped / moped.
The gas-nitrided washer has a small turned shoulder on the inside diameter to enclose the snap ring.
This 7 mm thick shim ring is used for newer rear wheel hubs in which the round part of the brake anchor plate consists of a rolled sheet metal and not a thick metal plate.
In addition, the spider of these wheel hubs was bolted on as standard and not firmly welded as on the older versions.
Ø inner: 10.7 mm
Ø outer: 19 mm
Thickness: 7 mm
Further accessories for your wheel hub, such as the 3.5 mm thick side bearing ring, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Sachs spare part number: F1147
| Manufacturer | swiing® revival parts |
| Surface | gas nitrided |
| Ø inside | 10.7 mm |
| Thickness | 7 mm |
| Ø outside | 19 mm |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Ratings
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Material: Steel · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Stock number: K042 · Bearing type: Ball ring · Width: 6.8 mm · Ø outside: 36 mm · Ø inside: 25 mm · Area of application: Standard · Ball bearing closed: No
EUR 9.80
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Total length: 175 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread length: 34 mm · Thread length: 45 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 29.60
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Width across flats: 17 mm · Height: 10 mm
EUR 8.55
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Surface: blank · Stock number: K1052 · Bearing type: Ball ring · Material: Steel · Ø inside: 14 mm · Ball bearing closed: No · Ø outside: 27 mm
EUR 8.55
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Material: Steel · Bearing cage: Sheet steel cage ball-guided · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Stock number: K042 · Bearing type: Ball ring · Width: 6.8 mm · Ø outside: 36 mm · Ø inside: 25 mm · Area of application: Standard · Ball bearing closed: No
EUR 9.80
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Width across flats: 17 mm · Height: 10 mm
EUR 8.55
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Surface: blank · Stock number: K1052 · Bearing type: Ball ring · Material: Steel · Ø inside: 14 mm · Ball bearing closed: No · Ø outside: 27 mm
EUR 8.55
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Total length: 175 mm · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Thread length: 34 mm · Thread length: 45 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm
EUR 37.10
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread length: 34 mm · Thread length: 45 mm
EUR 37.10
Collection only possible with online purchase and appointment.
