Rear, black primed steel mudguard for your Piaggio Ciao moped / moped with 16" or 17" rims.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
The mudguard has all the original mounting holes and the channel for the cable routing.
Shape: part-round
Width of mudguard profile (A): 76 mm
Height of mudguard profile (B): 35 mm
Endings: not folded at the front / folded open at the rear
Material: Steel, black primed
Total height from support surface to top edge (C): 159 mm
Total length over ends (D): 510 mm
Circumference (E): 620 mm
The mudguard is only primed, i.e. there may be slight scratches.
Other parts for your wheel fairing, such as paint polish or fastening material, can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 576135
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | primed |
| Color | black |
| Wheel size [inch] | 16 ", 17 " |
| Folding the ends | not folded, open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 510 mm |
| Scope | 620 mm |
| Wide mudguard profile | 76 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 159 mm |
| Mounting type | Nuts & bolts |
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Color: silver · Material: Chrome steel (known as Nirosta®) · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm
EUR 13.40
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.80
EUR 2’680.00/l
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Piaggio OEM number: 576135
EUR 42.80
swiing® revival rear fender Inox black | Piaggio Ciao
Manufacturer: swiing® revival parts · Surface: varnished · Material: Chrome steel (known as Nirosta®) · Folding the ends: not folded · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Color: black · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Mounting type: Nuts & bolts
EUR 53.80
Taillight | Piaggio Ciao P, SC, Bravo, Boxer BTV2
Manufacturer: Made in Italy · Test mark: none · Width: 40 mm · Color: red · Bulb holder: BA9s · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Battery operated: No · Height: 110 mm · Brake light: No · Reflectors: Yes · Depth: 75 mm
EUR 39.10
Set of rear fender mounting screws Inox original | Piaggio Ciao
Manufacturer: Piaggio · Material: Chrome steel (known as Nirosta®) · Material: Rubber · Color: black · Mounting type: Nuts & bolts · Piaggio OEM number: 013092 · Piaggio OEM number: 016406 · Piaggio OEM number: 020106 · Piaggio OEM number: 031092 · Piaggio OEM number: 174968 · Piaggio OEM number: 174969
EUR 30.50
Rear mudguard fixing screw Inox original | Piaggio Ciao
Manufacturer: Piaggio · Material: Chrome steel (known as Nirosta®) · Material: Rubber · Piaggio OEM number: 013092 · Piaggio OEM number: 016406 · Piaggio OEM number: 020106 · Piaggio OEM number: 031092 · Piaggio OEM number: 174968 · Piaggio OEM number: 174969
EUR 8.80
Moped fans also bought
Tail light black | Piaggio Ciao PX, C24, Bravo
Width: 130 mm · Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Bulb holder: BA9s · Color: black · Color: red · Mounting type: Nuts & bolts · Height: 58 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Depth: 43 mm · Number of fixing points: 2 pcs
EUR 23.20
swiing® revival front fender primed | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Steel · Surface: primed · Color: black · Mounting type: Nuts & bolts · Folding the ends: open folded · Shape of the mudguard: partly round · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
EUR 40.30
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø mounting frame: 30.05 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø inside: 27 mm · Height: 10.5 mm · Height: 17 mm · Thread type: FG25.4 (1" 24G)
EUR 23.20
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Total length: 1350 mm · Total length: 1600 mm · Outer shell length: 2000 mm · Total length: 2180 mm
EUR 24.40
Collection only possible with online purchase and appointment.
