Pedals for Piaggio mopeds made of black plastic housing and non-slip tread on both sides.
The reflectors on the sides contribute to safety in road traffic.
We recommend mounting the pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Original Piaggio spare part number: 813405
| Material | Plastic |
| Surface | ribbed |
| Color | black |
| Width | 51 mm |
| Thread type | FG14.3 (9/16" 20G) |
| Total length | 118 mm |
| Height | 29 mm |
| Drive | Outer edge |
| Width across flats | 15 mm |
| Reflectors | Yes |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 27.00
EUR 2’700.00/l
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Total height: 250 mm · Wide upright foot (F): 20 mm
EUR 36.80
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 24.50
GPO chain tensioner | Piaggio Ciao
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Color: black · Color: silver · Width: 45 mm · Number of teeth: 8 pcs · Ø outside sprocket: 33 mm · Total length: 64 mm · Number of fixing points: 1 pcs
EUR 11.60
GPO pedal cranks chrome 148 mm pair
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Width: 42 mm · Crank length (center-center): 120 mm · Wide intake: 17.5 mm · Total length: 148 mm · Ø Pedal wedge: 9 mm · Ø Pedal axle: 16 mm · Cranking (offset): 30 mm
EUR 86.00
GPO cranks black 148 mm pair
Manufacturer: GPO · Material: Steel · Color: black · Surface: varnished · Thread type: FG14.3 (9/16" 20G) · Width: 42 mm · Crank length (center-center): 120 mm · Total length: 148 mm · Wide intake: 17.5 mm · Ø Pedal wedge: 9 mm · Ø Pedal axle: 16 mm · Cranking (offset): 30 mm
EUR 86.00
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
