Spacer washer 6x31.5x0.2 which is installed behind the 6002 bearing for the crankshaft in the gearbox cover.
Fits 2-speed automatic ZA50 engines on Puch X30 NG2-AH, NG-2A, N-2A, Supermaxi LG2, Maxi S-2A and Allegro GS2 mopeds / mopeds.
Through the hole in the shim, transmission oil flows into the crankshaft journal.
The shim is made of hardened spring steel.
Ø inner: 6 mm
Ø outer: 31.5 mm
Thickness: 0.2 mm
This component is also known as a shim washer, bearing washer or thrust washer, depending on how it is used.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 321.1.10.637.1
Details
| Manufacturer | swiing® revival parts |
| Material | Spring steel |
| Surface | Hardened |
| Ø outside | 31.5 mm |
| Ø inside | 6 mm |
| Nominal diameter (thread) | 6 mm |
| Thickness | 0.2 mm |
Suitable for the following models
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) |
Accessories & related products
BING Jetstock 2.22 Bing SRE & SRA
Manufacturer: BING · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Drive: External hexagon · Ø nozzle holder: 2.22 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.22
EUR 19.40
swiing® revival gearbox cover gasket ZA50 engine | Puch Maxi S -2A, X30 NG - 2AH
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 175 mm · Number of fixing points: 6 pcs · Thickness: 0.3 mm · Width: 125 mm · Puch OEM number: 321.1.10.649.1
EUR 4.15
NSK 6002 ball bearing 15/32/9 | ZA50 motor
Bearing type: Deep groove ball bearing · Stock number: 6002 · Ø inside: 15 mm · Ø outside: 32 mm · Width: 9 mm · Inner ring width: 9 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Area of application: Standard
EUR 10.90
GPO bearing puller set inside
Width across flats Screw: 14 mm · Span: 8 mm · Span: 25 mm · Manufacturer: GPO · Clamping depth: 10 mm · Clamping depth: 20 mm · Total length: 140 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 11 pcs
EUR 207.40
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm
EUR 2.45
Not in stock
swiing® revival gearbox cover gasket ZA50 engine | Puch Maxi S -2A, X30 NG - 2AH
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 175 mm · Number of fixing points: 6 pcs · Thickness: 0.3 mm · Width: 125 mm · Puch OEM number: 321.1.10.649.1
EUR 4.15
Collection only possible with online purchase and appointment.
