Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | varnished |
| Color | silver |
| Number of fixing points | 2 pcs |
| Thread type | M4x0.7 (standard thread) |
| Total length | 99 mm |
| Height | 137 mm |
| Zündapp Belmondo |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 23.30
Adhesive kit tank & side guards | Zündapp Belmondo
Material: Polyvinyl chloride (PVC) · Color: black-matt · Color: white · Width: 280 mm · Width: 455 mm · Rear side texture: Adhesive · Height: 38 mm · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Transferfolie: No
EUR 41.70
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 98.30
swiing® revival 17" front fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 525 mm · Scope: 638 mm · Wide mudguard profile: 69 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 73.70
swiing® revival rear mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 318 mm · Ø mounting hole: 6.5 mm · Total length: 345 mm · Number of fixing points: 3 pcs · Mounting type: Nuts & bolts
EUR 44.20
Explore categories from Formwork & frame parts
Moped fans also bought
Adhesive kit tank & side guards | Zündapp Belmondo
Material: Polyvinyl chloride (PVC) · Color: black-matt · Color: white · Width: 280 mm · Width: 455 mm · Rear side texture: Adhesive · Height: 38 mm · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Frame (+ tank) · Transferfolie: No
EUR 41.70
swiing® Revival Exhaust Gasket | Zündapp Belmondo & Pony GTX, Cross 521
Place of use: Outlet · Ø inside: 25 mm · Ø outside: 38.3 mm · Manufacturer: swiing® revival parts · Material: Graphite / Graphite · Total length: 53 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.1 mm · Thickness: 1.5 mm · Hole spacing: 40 mm
EUR 4.80
FRABEL Vertical Fuel Valve M10x1 (screw-in type) with outlet at the bottom / Cast Iron
Manufacturer: FRABEL · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF10x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Reserve level: 65 mm · Mounting type: screw in (thread)
EUR 18.30
Working late? Evening hours on Thursday until 20:00
