High-quality revision kit for the Bing SRF and 17 mm Bing SRE tuning carburetor with Ø23 mm connection dimension to the intake manifold. The revision kit is suitable for Puch Maxi, Puch X30 Sport NS/NL and Puch X30 Sport NG-2AH, Sachs 503 and other mopeds & mopeds which are originally equipped with a 17 mm SRF or have been retrofitted with a 17 mm SRF tuning carburetor.
The following parts are included in the revision set:
- Float
- Float chamber sealing ring (sealing paper)
- Float needle
- Float axle
- Stand throttle screw & spring
- Start slide & choke pin (SRF)
- Float needle 39.5 mm (1 groove)
- Needle clip & spacer
- Gas slide (Ø 18.5 mm) & spring
- Carburetor cover gasket (SRF)
- Clamping screw M6 x 20 mm
- Senstock 2.20 (SRF) & gasket no. 74
- Swivel connection with screw and sealing rings
Attention: This revision set is only suitable for the Bing SRF & swiing SRF tuning carburetor with 17 mm (Ø 23 mm connection), which has the äusliche optics of the SRE and the slide tower of the SRF carburetor.
Nostalgic product for the highest demands of the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Steel, Plastic, Brass, Sealing carton, Sealing paper, Aluminum, Spring steel |
| Component group Carburetor | Sealing, revising |
| Color | silver, black, brown |
| Surface | raw, blank |
| Carburetor type | SRF |
| Ø Passage | 17 mm |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
17 mm Bing SRF carburetor (replica)
Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Ø fuel hose connection: 6 mm · Width: 64 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Total length: 78 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Height: 117 mm · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Area of application: Tuning · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 77.60
swiing® revival nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
EUR 19.00
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Carburetor type: SRF · Component group Carburetor: Carburetor complete · Nominal diameter: 16 mm · Nominal diameter: 17 mm · Ø fuel hose connection: 6 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17 mm · Hole spacing inlet: 40 mm · Ø Air filter connection: 60 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Area of application: Tuning · Ø Internal connection: 23 mm · Choke control: Hand choke
EUR 131.40
Bing "19 mm" SRF carburetor
Nominal diameter: 17 mm · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Ø Inside entrance: 19 mm · Ø Internal connection: 23 mm · Ø Output inside: 19 mm · Ø Air filter connection: 60.2 mm · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Area of application: Tuning
EUR 101.50
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø fuel hose connection: 5 mm · Area of application: Tuning · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Nozzle block: 2.2 · Width: 47 mm · Camouflaged: Yes · Nozzle size: 74 · Height: 89 mm · Height: 109 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 143.40
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø fuel hose connection: 5 mm · Area of application: Tuning · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 64.8 mm · Nozzle block: 2.2 · Width: 47 mm · Camouflaged: Yes · Nozzle size: 74 · Height: 89 mm · Height: 110 mm · Clamping screw torque (max.): 3 N/m
EUR 143.40
Hot
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Ø fuel hose connection: 5 mm · Area of application: Tuning · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Width: 47 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Height: 89 mm · Height: 112 mm · Ø Air filter connection: 23 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 61.5 mm · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 143.40
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 2.85
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.80
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Ø Internal connection: 28 mm · Mounting type: Plug connection clamped · Area of application: Standard · Area of application: Tuning
EUR 29.80
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Ø inside: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 38 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø External connection: 23 mm · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Total height: 53.5 mm · Number of fixing points: 2 pcs · Height flange center hole: 42 mm · Camouflaged: Yes
EUR 53.70
Collection only possible with online purchase and appointment.
