Grey air filter suitable for manual Puch X30 NS, NL mopeds. Also for Puch Sprinter.
«Limited edition»
A racing screen is installed in the air filter, which allows more air through than the original filter screen due to fewer layers.
Figure 4 serves only as an illustration between original and racing air filter screen (left: racing / right: original).
Exclusively at mofakult.ch. – If the pioneer Johann Puch could see this, even he would rise from the grave and secure one of these exclusive specimens. In honor of Johann Puch (1862 - 1914). Plastic injection molding.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 321.1.15.070.0
Manufacturer: GPO · Camouflaged: No · Color: yellow · Material: Steel · Surface: galvanized (yellow) · Height: 9.7 mm · Ø outside: 52 mm · Area of application: Tuning
Manufacturer: swiing® revival parts · Camouflaged: Yes · Color: gray · Material: Plastic · Filter type: Racing screen · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Area of application: Tuning, Standard
| Manufacturer | swiing® revival parts |
| Camouflaged | Yes |
| Material | Plastic |
| Area of application | Tuning |
| Color | gray |
| Filter type | Racing screen |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 20 mm |
| Puch | Z50 (X30 Sport) |
Ratings
Accessories & related products
Explore categories from Carburetor & intake system
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Number of components: 10 pcs · Hole spacing outlet: 42 mm
EUR 24.50
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
EUR 13.40
EUR 29.78/l
GPO intake manifold 15 mm square | Puch X30 NS, NL, Sprinter
Ø inside: 15 mm · Manufacturer: GPO · Material: Aluminum · Hole spacing inlet: 38 mm · Total length: 48 mm · Camouflaged: No · Ø External connection: 20 mm · Area of application: Tuning · Height flange center hole: 60 mm · Total height: 70 mm · Number of fixing points: 2 pcs · Mounting type: Screws
EUR 36.80
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Choke control: Hand choke · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Area of application: Tuning · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
