Rear mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A and Puch Sprinter moped.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
The mudguard has all the original mounting holes, the cut-out for the air filter and the tabs for the cable routing.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: not folded at the front / folded closed at the rear
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 320 mm
Total length over ends (D): 623 mm
Circumference (E): 1005 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | not folded, closed folded |
| Shape of the mudguard | round |
| Total length over ends | 623 mm |
| Scope | 1020 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 320 mm |
| Puch |
Ratings
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.50
Not in stock
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 74.20
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Total length: 147 mm · Color: black-matt · Width: 105 mm · Height: 6 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
EUR 16.00
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.50
Not in stock
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Bearing type: Plain bearing · Ø Bundle: 24.1 mm · Ø inside: 16.2 mm · Total length: 19 mm · Ø outside: 20.2 mm · Color: black · Puch OEM number: 349.1.42.005.1
EUR 3.10
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Clamping diameter: 22 mm · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Color: Chrome · Total length: 360 mm · Thread size: M8
EUR 30.90
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Wide intake: 28 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
EUR 92.80
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 74.20
swiing® revival mudguard arch 17" front chrome
Manufacturer: swiing® revival parts · Material: Steel · Outer width: 130 mm · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Wheel size: 17 " · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.4 mm · Ø outside: 14 mm · Wide intake: 115 mm · Number of fixing points: 6 pcs · Hole spacing: 35 mm · Total length: 270 mm
EUR 24.70
swiing® revival front mudguard strut 17" chrome
Ø mounting hole: 7 mm · Ø mounting hole: 13 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts · Wheel size: 17 " · Total length: 310 mm
EUR 25.70
Collection only possible with online purchase and appointment.
