Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
EUR 13.40
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Wheel size: 17 " · Shape of the mudguard: round · Total length over ends: 560 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
EUR 73.70
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 325 mm · Wheel size: 17 " · Distance mudguard - center hole: 315 mm · Wide intake: 65 mm · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm
EUR 15.90
Mudguard strut 16" chrome
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Wheel size: 16 " · Distance mudguard - center hole: 290 mm · Wide intake: 75 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Number of fixing points: 5 pcs
EUR 22.00
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Width: 105 mm · Height: 6 mm · Total length: 147 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 6 pcs · Thread type: M5x0.8 (standard thread)
EUR 15.90
Explore categories from Mudguard
Moped fans also bought
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm
EUR 13.40
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.45
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Area of application: Gearbox lubrication with clutch · Gearbox type: Manual gearshift
EUR 14.20
EUR 31.56/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 23.30
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Number of components: 1 pcs · Nipple length: 10 mm · Piaggio OEM number: 270460
EUR 2.95
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø cable: 2.2 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Material: Steel · Area of application: Standard · Color: black · Ø inside: 2.5 mm · Total length: 6000 mm · Ø outside: 5 mm
EUR 14.70
EUR 2.45/m
Hot
Manual indoor cable set
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 12.20
ESJOT Gear Ring, 37 Teeth, Reverse, Galvanized
Chain type: 415H · Ø inside: 94 mm · Thickness: 4.1 mm · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm
EUR 59.00
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Area of application: Tuning · Color: black · Filter type: Racing screen · Total length: 165 mm · Width: 68 mm · Mounting type: Plug connection clamped · Height: 52 mm · Ø Internal connection: 20 mm
EUR 73.70
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Wheel size: 17 " · Shape of the mudguard: round · Total length over ends: 560 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
EUR 73.70
Working late? Evening hours on Thursday until 20:00
