Stainless steel front fender for your Puch Maxi S or N moped (older model) with 17-inch rims.
The high-gloss polished finish ensures a first-class appearance and gives your moped the shine it deserves.
Since the fender is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. In this version, the holes for the edge protectors at the front and rear are already pre-drilled.
Shape: rectangular
; fender profile width (A): 82 mm
; fender profile height (B): 35 mm
; ends: folded
closed on both sides; material: Chrome steel (commonly known as “Nirosta”), high-gloss polished
Total height from contact surface to top edge (C): 200 mm
Total length across ends (D): 565 mm
Circumference (E): 740 mm
You can find additional parts for your bike fairing, such as stainless steel polish or mounting hardware, in the accessories section.
A nostalgic product meeting the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Wheel size | 17 " |
| Folding the ends | not folded |
| Color | Chrome |
| Shape of the mudguard | angular |
| Total length over ends | 565 mm |
| Scope | 740 mm |
| Wide mudguard profile | 82 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 200 mm |
| Mounting type | Nuts & bolts |
| Puch |
Accessories & related products
swiing® revival 17" rear fender Inox | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Mounting type: Nuts & bolts · Wheel size: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm
EUR 46.60
swiing® revival screw set front fender Inox | Puch Maxi S, N
Storage method: Sack · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 30 pcs · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Screw head: Lens head · Shank: No · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Width across flats: 8 mm · Strength class: A2-70 · Thread length: 10 mm · Thread length: 15 mm
EUR 15.60
Explore categories from Mudguard
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø wire: 2.4 mm · Length spring hook: 50 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Ø outside: 30 mm · Total length: 125 mm · Ø inside: 25.5 mm · Area of application: Original · Area of application: Standard
EUR 6.00
Continental 2.00 - 2.50 x 17" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 17 " · Old designation: 21 x 2 " · Old designation: 21 x 2.25 " · Old designation: 21 x 2.5 "
EUR 18.30
IMCA shock absorber 30 cm black
Manufacturer: IMCA · Material: Steel · Surface: varnished · Damping type: Spring · Ø outside: 45 mm · Total length: 330 mm · Color: black · Ø spars: 28 mm · Adjustable: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
EUR 73.70
Hot 
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 53 mm · Mounting type: Screws · Area of application: Tuning · Number of fixing points: 2 pcs · Height flange center hole: 43 mm · Total length: 46 mm · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 43.00
Working late? Evening hours on Thursday until 20:00
