Black, adjustable dampers for your moped, moped and small motorcycle.
The height or preload of the coil springs can be adjusted using the special spring mount.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting in the event of lateral forces.
The scope of delivery includes one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
| Manufacturer | IMCA |
| Hole spacing | 300 mm |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Ø spars | 28 mm |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm |
| Ø outside | 45 mm |
| Adjustable | Yes |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
IMCA shock absorber 30 cm chrome
Manufacturer: IMCA · Material: Steel · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Ø spars: 28 mm · Ø Fastening inside: 10 mm · Hole spacing: 300 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 62.60
Not in stock
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.90
EUR 2’690.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Ø outside: 52 mm · Color: black · Manufacturer: YSS · Material: Steel · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø spars: 32 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm · Ø Fastening inside: 10 mm
EUR 171.90
IMCA shock absorber 30 cm chrome / black
Manufacturer: IMCA · Material: Steel · Surface: chrome-plated · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø spars: 28 mm · Ø outside: 45 mm · Ø Fastening inside: 10 mm · Color: Chrome · Color: black · Number of fixing points: 2 pcs · Hole spacing: 300 mm · Mounting type: Nuts & bolts
EUR 73.60
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
EUR 15.90
Shock absorber 30 cm black (pair) original | Pony Cross 521 (P8020)
Manufacturer: Pony · Material: Steel · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø outside: 45 mm · Color: black · Ø spars: 28 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 62.60
Collection only possible with online purchase and appointment.
