Steel protective sleeve with an M10 x 1 mm thread to protect thread ends, e.g. on the crankshaft, when pressing on them with a puller.
Dimensions of the centering sleeves:
Internal thread: MF10 x 1 mm
Ø external: 14 mm
Total length: 25 mm
Thread depth: 10 mm
Material: Steel, galvanized
You can find the matching puller and other parts in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Clamping depth | 10 mm |
| Area of application | Special tool |
| Material | Steel |
| Surface | galvanized (blue) |
| Diameter | 14 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Total length | 25 mm |
| Number of components | 1 pcs |
Ratings
Accessories & related products
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Total length: 120 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Number of components: 1 pcs · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Area of application: (Dis)assembly tool
EUR 54.00
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Number of components: 2 pcs · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Area of application: (Dis)assembly tool
EUR 22.00
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202 (professional tool)
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs
EUR 49.00
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Height: 5.3 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Total length: 145 mm · Width: 105 mm · Thread length: 8 mm · Color: silver · Ø mounting hole: 5 mm
EUR 13.40
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Bulb holder: BA15s · Tension: 6 V · Color: black · Color: red · Width: 60 mm · Height: 110 mm · Test mark: none · Ø Receptacle: 4 mm · Depth: 80 mm · Number of fixing points: 2 pcs · Brake light: No · Reflectors: Yes · Battery operated: No · Mounting type: Nuts & bolts
EUR 44.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 12.20
EUR 27.11/l
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Nominal diameter: 38 mm · Manufacturer: Meteor · Thick piston ring: 1.6 mm · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight piston kit: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005
EUR 61.30
Oil seal NBR 15/30/7 B AS | Sachs 503, 50/2
Shaft seal type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: Sachs · Material: NBR · Ø inside: 15 mm · Width: 7 mm · Ø outside: 30 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
EUR 6.65
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 30.60
swiing® ingenious thread protection bushing M16x1.5
Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 22 mm · Total length: 55 mm · Thread type: MF16x1.5 (fine pitch thread) · Area of application: Special tool
EUR 19.50
swiing® ingenious thread protection bushing M8
Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 12 mm · Total length: 23 mm · Thread type: M8x1.25 (standard thread) · Area of application: Special tool
EUR 8.45
swiing® ingenious thread protection bushing M12x1.25
Width across flats (trigger): 13 mm · Width across flats Screw: 13 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 15 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 16 mm · Total length: 25 mm · Thread type: MF12x1.25 (fine pitch thread) · Area of application: Special tool
EUR 13.40
Collection only possible with online purchase and appointment.
