Intake air restrictor with Ø 12.5 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories section and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Color | black |
| Surface | anodized |
| Carburetor type | SRE |
| Ø outside | 15 mm |
| Ø Passage | 12.5 mm |
Ratings
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Camouflaged: No · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 79.90
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 98.30
swiing® ingenious intake restrictor Ø 10.5 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRF · Ø Passage: 10.5 mm
EUR 9.60
EUR 7.25
swiing® ingenious intake restrictor Ø 11 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø Passage: 11 mm
EUR 9.60
EUR 7.25
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Total length: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø Passage: 12 mm
EUR 9.60
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Number of components: 7 pcs
EUR 12.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.45
BING O-ring Bing SRE & 85, Ø 20 mm
Place of use: Carburetor · Manufacturer: BING · Material: Rubber · Area of application: Standard · Color: black · Surface: raw · Cord thickness: 1.4 mm · Number of components: 1 pcs · Ø inside: 17.2 mm · Ø outside: 20 mm · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle size: 62 · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 98.30
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Total length: 17 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø Passage: 12 mm
EUR 9.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
