Special tool made from hardened and gas-nitrided special steel for loosening freewheels on your moped / moped.
The tool is pushed over the wheel axle and the two cams are placed in the groove in the freewheel. Now turn the wheel nut onto the wheel axle so that the tool is pressed against the freewheel.
The freewheel can now be released with a fork wrench without using too much force. As soon as it is attached, the wheel nut must be removed from the axle again.
Ø Bore for wheel axle: 12.2 mm
Width of pins: 6 mm
Width of key: 21 mm
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | Hardened |
| Width across flats SW | 21 mm |
| Area of application | Special tool |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio |
Accessories & related products
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Area of application: Standard
EUR 3.40
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Area of application: Standard
EUR 2.90
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002
EUR 10.70
EUR 12.00
EUR 23.78/l
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Width across flats SW: 19 mm
EUR 18.00
Not in stock
Collection only possible with online purchase and appointment.
