
High-quality Ø 80x18 mm brake pads with return springs for the front and rear drum brakes on your moped, moped and small motorcycle.
The lining is slotted at an angle. This ensures better heat and brake dust dissipation, resulting in an increased braking effect.
Alternative brake pads, suitable springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Slotted | Yes |
| Manufacturer | swiing® ingenious parts |
| Area of application | Racing |
| Width | 18 mm |
| Springs included | Yes |
| Ø locating bolt | 10 mm |
| Color | silver |
| Number of springs | 2 pcs |
| Ø drum | 80 mm |
Accessories & related products
Explore categories from Drum brake
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Manufacturer: GPO · Material: Steel · Color: black · Surface: powder-coated · Ø mounting hole: 6.7 mm · Number of teeth: 45 pcs · Chain pitch: 1/2" x 3/16" · Hole spacing: 36.5 mm · Thickness: 4.5 mm · Number of fixing points: 6 pcs · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
EUR 23.80
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Total length: 185 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats: 19 mm
EUR 17.80
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Ø bore: 4.05 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø Pin: 4 mm
EUR 22.60
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: gray · Thread type: M6x1 (standard thread) · Number of components: 24 pcs · Screw head: Hexagon · Drive: External hexagon · Shank: No · Thread length: 22 mm · Width across flats: 10 mm
EUR 15.40
Cast wheel hub | Puch Maxi, X30 NG-2AH
Ø mounting hole: 6.1 mm · Material: Aluminum · Surface: blank · Surface: raw · Ø axle: 12 mm · Color: silver · Ø bolt circle: 105 mm · Ø inside: 27.9 mm · Total length: 105 mm · Thread length: 12 mm · Ø drum: 80 mm · Thread type: FG34.8 (1.37" 24G) · Ø outside: 114.7 mm · Number of fixing points: 12 pcs · Area of application: Tuning
EUR 107.50
Not in stock
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø External brake pads: 80 mm · Total length: 187 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Cranking (offset): 8 mm · Brake lever length (lever length): 55 mm · Ø outside: 91 mm
EUR 83.60







