High-quality flange gasket consisting of 2 oil paper gaskets and a spacer made of temperature-resistant plastic, suitable for the 15 mm intake manifold of your Puch Velux X30 moped / moped with Z50 engine.
The seal also fits Sachs 502, 50/2 and 503 engines. The inner diameter of the inlet gasket is compatible with original 503 cylinders with a seal, as well as with racing cylinders with a 15 mm inlet diameter.
The 4 mm special gasket with round inlet prevents excessive heating of the intake tract, which could have a negative effect on the air-fuel mixture. Excessively high temperatures in the intake tract can reduce the air density and thus reduce the efficiency of the combustion process.
The intake gasket can also be used if the carburettor needs to be raised.
You can find the matching intake manifold and carburetor in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Oiled paper, Phenolic resin (known as Bakelite®) |
| Nominal diameter | 15 mm |
| Thickness | 4 mm |
| Ø inside | 15 mm |
| Hole spacing inlet | 32 mm |
Suitable for the following models
| Puch | Z50 (X30 Velux) |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS) 503 |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
EUR 150.90
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
BING O-ring Bing SRE & 85, Ø 20 mm
Number of components: 1 pcs · Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Surface: raw · Cord thickness: 1.4 mm · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.55
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Material: Sealing paper · Camouflaged: No · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm
EUR 6.00
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Total length: 66 mm · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Area of application: Tuning
EUR 98.10
swiing nozzle set M3.5 (60 - 70) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Drive: Slot · Quantity: 11 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70
EUR 26.90
swiing® ingenious 15 mm intake manifold short version | Sachs 503 2AL, 2BL
Material: Aluminum · Manufacturer: swiing® ingenious parts · Thread type: M6x1 (standard thread) · Total length: 50 mm · Ø External connection: 20 mm · Ø inside: 15 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 32 mm · Area of application: Tuning · Alternative version of the Pony OEM number: A2177
EUR 61.30
Collection only possible with online purchase and appointment.
