
Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Chrome steel (known as Nirosta®) |
| Surface | blank |
| Area of application | Performance, Racing, High End, Tuning |
| Ø bolt circle | 101 mm |
| Thickness | 5 mm |
| Ø inside | 71.8 mm |
| Ø mounting hole | 5 mm |
| Ø outside | 117 mm |
| Number of fixing points | 4 pcs |
| Weight | 250 g |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Tension: 12 V · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Performance: 60 W · Weight: 340 g · Number of fixing points: 6 pcs · Mounting type: Screws
EUR 368.60
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Ø cable: 7 mm · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Weight: 424 g · Number of fixing points: 3 pcs · Mounting type: Screws
EUR 344.00
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Thread type: MF27x1 LH (fine/left-hand thread) · Weight: 337 g
EUR 117.80
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Number of cables: 4 pcs · Surface: anodized · Tension: 12 V · Ø inside: 27.5 mm · Performance: 60 W · Ø outside: 90 mm · Cable length: 640 mm · Color: black · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 184.20
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 73.60
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Weight: 100 g · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 24.50
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Total length: 63 mm · Width: 100 mm · Color: red · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Height: 28 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 374.70
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 12.20
EUR 27.11/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Area of application: Tuning · Ø cable: 7 mm · Tension: 12 V · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Performance: 60 W · Weight: 340 g · Number of fixing points: 6 pcs · Mounting type: Screws
EUR 368.60
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 73.60
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Weight: 100 g · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 24.50
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Ø cable: 7 mm · Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Area of application: Tuning
EUR 460.70
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 6 mm · Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 76.80










