Light coil with 12 volt for HPI racing ignitions suitable for your moped, moped and small motorcycle.
The light generation coil is used when a racing ignition without light is to be retrofitted.
Number of mounting brackets: 2 pieces
Hole spacing: 49 mm
Alternative racing ignitions with light and other add-on parts can be found in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Manufacturer | HPI |
| Hole spacing | 49 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Tension | 12 V |
| Mounting type | Screws |
| Number of fixing points | 2 pcs |
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Tomos | A3 |
| DKW | |
| Hercules | |
| Kreidler | Flory MF Foil |
| Zündapp | 434 Chassis (mountaineer) 247 Motor 278 Motor |
| KTM | |
| Rixe |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Ø cable: 7 mm · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 6 pcs · Ø Flywheel outside: 71.5 mm · Mounting type: Screws · Weight: 340 g · Area of application: Tuning
EUR 367.70
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 3 pcs · Ø cable: 7 mm · Weight: 424 g · Ø Flywheel outside: 62 mm · Mounting type: Screws
EUR 343.10
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm
EUR 117.60
HPI stator ignition
Manufacturer: HPI · Material: Aluminum · Number of cables: 4 pcs · Surface: anodized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Performance: 60 W · Ø inside: 27.5 mm · Cable length: 640 mm · Ø outside: 90 mm · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs · Color: black
EUR 183.80
HPI racing ignition 12V with light breaker housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: HPI · Area of application: Tuning · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 4 pcs · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 140 mm · Mounting type: Screws
EUR 429.00
HPI racing ignition 12V with light 60W | Sachs 504, 508
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 82 mm · Number of fixing points: 4 pcs · Ø cable: 7 mm · Ø Internal flywheel: 61.5 mm · Weight: 344 g · Ø Flywheel outside: 71.5 mm · Mounting type: Screws
EUR 392.20
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 12 V · Ø cable: 7 mm · Performance: 60 W · Area of application: Tuning
EUR 459.60
Moped fans also bought
ESJOT sprocket 40 teeth 4-hole coaster black
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Ø mounting hole: 6.4 mm · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Number of teeth: 40 pcs · Thickness: 4.5 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm · Color: black
EUR 67.30
ESJOT sprocket 37 teeth 4-hole coaster black
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Ø mounting hole: 6.4 mm · Material: Steel · Surface: powder-coated · Ø inside: 94 mm · Number of teeth: 37 pcs · Thickness: 4.1 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm · Color: black
EUR 64.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Manufacturer: GPO · Width across flats (trigger): 27 mm · Clamping depth: 10 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8
EUR 12.10
Collection only possible with online purchase and appointment.
