Rubber bumper for the 1st generation of the original fork on your Piaggio Ciao P moped / moped.
This protective rubber with 8 mm pin was only installed on very early models.
However, the rubber stud is also suitable for later forks where the drill hole has become larger due to corrosion or the rubber stud with 7 mm stud does not stay perfectly in position.
Price per piece. Two pieces are required to overhaul the fork.
You can find other wear parts for your fork in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 103699
Alternative to the original Piaggio spare part number: 176373
| Manufacturer | Made in Italy |
| Material | Rubber |
| Width | 16 mm |
| Total length | 22 mm |
| Color | black |
| Ø mounting hole | 8 mm |
| Piaggio OEM number | 103699 |
| Alternative version of the Piaggio OEM number | 176373 |
| Piaggio | Ciao - P |
Accessories & related products
swiing® revival fork spring Ø 24 mm reinforced (pair) Inox | Piaggio Ciao P, SC
Ø wire: 4.25 mm · Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (known as Nirosta®) · Surface: electropolished · Ø inside: 16.25 mm · Ø outside: 24.75 mm · Total length: 100 mm · Piaggio OEM number: 113124
EUR 34.20
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (known as Nirosta®) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
EUR 36.70
Not so nice 
Fork repair kit (galvanized springs) | Piaggio Ciao
Ø wire: 3.8 mm · Material: Plastic · Material: Rubber · Material: Spring steel · Material: Steel · Surface: galvanized (blue) · Surface: powder-coated · Color: black · Color: silver · Ø outside: 27.4 mm · Ø inside: 20 mm · Total length: 99 mm
EUR 48.90
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 12.10
CIF wheel axle set M11x1 x 165 mm front wheel galvanized | Piaggio Ciao, SI, Bravo
Manufacturer: CIF · Ball bearing closed: No · Material: Steel · Surface: galvanized (blue) · Surface: galvanized (yellow) · Thread type: MF11x1 (fine pitch thread) · Total length: 165 mm · Ø shaft: 10.3 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Height: 2 mm · Height: 4 mm · Height: 10 mm · Shank length: 18 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Thread length: 73 mm
EUR 18.30
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø mounting frame: 30.05 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø inside: 27 mm · Height: 10.5 mm · Height: 17 mm · Thread type: FG25.4 (1" 24G)
EUR 23.20
Not in stock
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 24.40
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Width: 5 mm · Ø outside: 30 mm
EUR 7.25
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (known as Nirosta®) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
EUR 36.70
Collection only possible with online purchase and appointment.
