All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
logo_stage6

For: Universal · Puch

34980

Stage6 reed valve block VForce 3 by Moto Tassinari

rating iconrating iconrating iconrating iconrating icon
No reviews
EUR 113.50

Incl. 25.5% VAT.

Description

Stage6 VForce 3 reed valve block for the ADDY GME engine housing «Der.prüfstand» on your Puch moped / moped.

The V-Force 3 reed valve block was developed in close cooperation with the renowned American manufacturer Moto Tassinari, which is known for its high-performance reeds in the field of cross engines. Its innovative, patented design with the double V-diaphragm (consisting of 8 lamellas) is optimized for flow and passage. This leads to significantly improved filling of the crankshaft housing, as the intake cross-section and the reed surface area are almost doubled.

ManufacturerStage6
Number of flaps8 pcs
Hole spacing52 mm
Universal
Puch

E50

Accessories & related products

Sealing paper set 4 pcs.
undefined

Universal

17871

Sealing paper set 4 pcs.

Manufacturer: Made in Spain · Material: Sealing carton · Material: Sealing paper · Place of use: Universal · Thickness: 0.25 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 1.2 mm

EUR 23.80

Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"
undefined

Universal

21119

Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"

Nominal diameter: 28 mm · Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Color: black · Surface: varnished · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning

EUR 209.10

Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"
undefined

Universal

21120

Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"

Nominal diameter: 24 mm · Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Color: black · Surface: varnished · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning

EUR 199.60

Athena Athesil sealing compound gray (silicone) 80 ml permanently elastic up to 300 °C
undefined

Universal

32422

Athena Athesil sealing compound gray (silicone) 80 ml permanently elastic up to 300 °C

Manufacturer: Athena · Temperature resistance (min.): -40 - 300 °C · Material: Silicone · Contents: 80 ml · Area of application: Chemistry · Color: gray

EUR 23.80

EUR 297.50/l

Stage6 adapter intake manifold Dell'Orto / Polini CP carburetor 21 mm
undefined

For: Universal · Puch

34981

Stage6 adapter intake manifold Dell'Orto / Polini CP carburetor 21 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 21 mm · Hole spacing inlet: 60 mm

EUR 20.20

Not in stock

Stage6 adapter intake manifold Mikuni carburetor 24 mm
undefined

For: Universal · Puch

34982

Stage6 adapter intake manifold Mikuni carburetor 24 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 24 mm · Hole spacing inlet: 60 mm

EUR 20.20

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm
undefined

For: Universal · Puch

34983

Stage6 adapter intake manifold PWK carburetor 19 - 28 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 30 mm · Ø inside: 33 mm · Hole spacing inlet: 60 mm

EUR 20.20

Stage6 adapter intake manifold PWK carburetor from 30 mm
undefined

For: Universal · Puch

34984

Stage6 adapter intake manifold PWK carburetor from 30 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 35 mm · Ø inside: 40 mm · Hole spacing inlet: 60 mm

EUR 20.20

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35283

ADDY engine housing GME "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 514.10

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35285

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 573.90

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

For: Puch

35286

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

Material: Aluminum · Thread type: M6x1 (standard thread) · Width: 66 mm · Total length: 48 mm · Hole pattern [mm]: 37 x 55 · Hole spacing: 52 mm

EUR 161.30

Inox
Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35288

Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 25 mm · Hole pattern [mm]: 55 / 60

EUR 77.60

Inox
Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35289

Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 29 mm · Hole pattern [mm]: 55 / 60

EUR 77.60

Not in stock

Explore categories from Carburetor & intake system

S-10-40-010_Ansaugstutzen
Intake manifold & intake rubber
S-10-40-020_Membran_System
Membrane system
S-10-40-050_Luftfilter
Air filter
S-10-40-040_Duesen
Nozzles
S-10-40-030_Benzinzufuhr
Fuel supply
S-10-40-060_Vergaser
Carburetor

Moped fans also bought

PVL ignition coil analog 105458 / 458115
undefined

For: Puch · Sachs · Zündapp Belmondo · Tomos · DKW · Hercules · Kreidler · Zündapp · KTM · Rixe

16308

PVL ignition coil analog 105458 / 458115

Ø mounting hole: 6 mm · Manufacturer: PVL · Place of use: External (outside the ignition) · Color: black · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning

EUR 118.30

PVL stator "1443" ignition
undefined

For: Puch · Sachs · Zündapp Belmondo · Tomos · DKW · Hercules · Kreidler · Zündapp · KTM · Rixe

16309

PVL stator "1443" ignition

Manufacturer: PVL · Material: Aluminum · Color: black · Number of cables: 2 pcs · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 118.30

Honing brush Ø 38 - 51 mm Cylinder
angle-right

Universal

28647

Honing brush Ø 38 - 51 mm Cylinder

Drive shank Drill chuck: round · Diameter: 38 - 51 mm · Grain size: 180 · Material: Silicon carbide · Area of application: Workshop accessories · Number of components: 1 pcs

EUR 51.30

Stage6 adapter intake manifold Mikuni carburetor 24 mm
undefined

For: Universal · Puch

34982

Stage6 adapter intake manifold Mikuni carburetor 24 mm

Manufacturer: Stage6 · Material: Rubber · Ø inside: 24 mm · Hole spacing inlet: 60 mm

EUR 20.20

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50
undefined

For: Puch

35285

ADDY engine housing GME spindled "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 573.90

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

For: Puch

35286

Membrane box for ADDY GME engine housing "der.pruefstand" | Puch E50

Material: Aluminum · Thread type: M6x1 (standard thread) · Width: 66 mm · Total length: 48 mm · Hole pattern [mm]: 37 x 55 · Hole spacing: 52 mm

EUR 161.30

Inox
Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35288

Intake manifold 25 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 25 mm · Hole pattern [mm]: 55 / 60

EUR 77.60

Inox
Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50
undefined

For: Universal · Puch

35289

Intake manifold 29 mm ADDY GME engine housing "der.pruefstand" Inox | Puch E50

Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Ø inside: 29 mm · Hole pattern [mm]: 55 / 60

EUR 77.60

Not in stock

Set
ADDY engine housing set GME "der.pruefstand-Edition" | Puch E50
undefined
angle-right

For: Puch

35344

ADDY engine housing set GME "der.pruefstand-Edition" | Puch E50

Manufacturer: ADDY · Material: Aluminum

EUR 777.20

Not in stock