Nos
Hot 
Classic saddle seat from old stock with beige imitation leather cover and red print in 80s/90s style, suitable for your Piaggio Si moped / moped.
The black painted base frame as well as the folding hinges and the latch are made of metal. A practical gimmick is the welded-on air pump holder on the underside.
The seams on the seat base are neatly finished and the hardness of the padding is chosen so that your rear end can withstand longer rides without damage.
Seat length: 470 mm
Back width: 180 mm
Front width: 130 mm
Upholstery height: 80 mm
Hinge: 100 x 50 mm
Intermediate dimension of hinge lugs: 43 mm
Distance between center / center of both hinges: 140 mm
Ø mounting bracket: 9 mm
Hole spacing: 25 mm
Note: To the best of our knowledge, this saddle was only installed on Italian models and therefore requires its own construction in order to be mounted and unfolded on the Swiss frame.
The underframe may show slight color variations.
You can find more parts for your Piaggio Si in the accessories section.
Original Piaggio spare part. NOS – New from old stock.
Details
| Manufacturer | Piaggio |
| Material | Imitation leather, Foam, Sheet metal (steel) |
| Surface | raw, varnished |
| Color | beige, red, black |
| Spring-loaded | No |
| Total length | 470 mm |
| Lettering | Yes |
| Width | 130 mm, 180 mm |
| Hole pattern [mm] | 25 |
| Height | 80 mm |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Surface: varnished · Manufacturer: SITO · Material: Steel · Ø Internal connection: 22.3 mm · Ø Silencer: 70 mm · Flame tube attachment: Plug connection clamped · Ø outside: 14 mm · Total length: 720 mm · Color: black · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Mounting type: Welded lug
EUR 85.80
EUR 98.10
EBR fork black | Piaggio SI
Surface: chrome-plated · Surface: varnished · Manufacturer: EWC · Material: Steel · Color: Chrome · Color: black · Adjustable: No · Spar end distance (center-center): 139 mm · Ø outer head tube: 27.9 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 173 mm · Thread length: 58 mm · Fork bridge - center wheel axle: 408 mm · Thread type: MF27.5x1 (fine pitch thread) · Distance brake cam to wheel axle center-center: 62 mm · Total length: 675 mm
EUR 251.60
Not in stock
Aquila seat beige / red NOS | Piaggio SI
Manufacturer: Made in Italy · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Surface: varnished · Color: beige · Color: black · Color: red · Spring-loaded: No · Lettering: Yes · Total length: 470 mm · Width: 130 mm · Width: 180 mm · Hole pattern [mm]: 25 · Height: 80 mm · Number of fixing points: 6 pcs
EUR 184.10
Aquila seat red / white NOS | Piaggio SI
Manufacturer: Made in Italy · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Surface: varnished · Color: black · Color: red · Color: white · Spring-loaded: No · Lettering: Yes · Total length: 470 mm · Width: 130 mm · Width: 180 mm · Hole pattern [mm]: 25 · Height: 80 mm · Number of fixing points: 6 pcs
EUR 184.10
Nos
Hot
Seat red NOS | Piaggio SI
Manufacturer: Piaggio · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Surface: varnished · Color: red · Spring-loaded: No · Lettering: Yes · Total length: 430 mm · Width: 130 mm · Width: 180 mm · Hole pattern [mm]: 25 · Height: 80 mm · Number of fixing points: 6 pcs
EUR 184.10
Moped fans like you also bought:
SITO exhaust Ø 20 mm | Piaggio Ciao, Bravo
Surface: varnished · Manufacturer: SITO · Material: Steel · Ø Internal connection: 22.5 mm · Ø Silencer: 65 mm · Flame tube attachment: Plug connection clamped · Total length: 605 mm · Color: black · Ø Flame tube outside: 20 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Mounting type: Welded lug
EUR 79.70
Collection only possible with online purchase and appointment.
