Classic saddle seat from old stock with beige / red imitation leather cover, suitable for your Piaggio Si moped / moped.
The black painted base frame as well as the folding hinges and the latch are made of metal. As with the original, an air pump holder is also welded on.
The seams on the seat base are neatly finished and the hardness of the upholstery is chosen so that your rear end can withstand longer rides without damage.
Seat length: 470 mm
Back width: 180 mm
Front width: 130 mm
Upholstery height: 80 mm
Hinge: 100 x 50 mm
Intermediate dimension of hinge lugs: 43 mm
Distance between center / center of both hinges: 140 mm
Ø mounting bracket: 9 mm
Hole spacing: 25 mm
Note: To the best of our knowledge, this saddle was only installed on Italian models and therefore requires its own construction in order to be mounted and unfolded on the Swiss frame.
The underframe may show slight color variations.
You can find more parts for your Piaggio Si in the accessories section.
NOS – New from old stock.
A quality product made in Italy.
Details
| Surface | raw, varnished |
| Manufacturer | Made in Italy |
| Material | Imitation leather, Foam, Sheet metal (steel) |
| Spring-loaded | No |
| Lettering | Yes |
| Hole pattern [mm] | 25 |
| Color | beige, red, black |
| Number of fixing points | 6 pcs |
| Total length | 470 mm |
| Width | 130 mm, 180 mm |
| Height | 80 mm |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Surface: varnished · Manufacturer: SITO · Material: Steel · Ø Internal connection: 22.3 mm · Ø Silencer: 70 mm · Flame tube attachment: Plug connection clamped · Ø outside: 14 mm · Total length: 720 mm · Color: black · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Mounting type: Welded lug
EUR 85.80
EUR 98.10
EBR fork black | Piaggio SI
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Color: Chrome · Color: black · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 139 mm · Ø outer head tube: 27.9 mm · Ø head tube inside: 22 mm · Head tube length: 173 mm · Total length: 675 mm · Fork bridge - center wheel axle: 408 mm · Distance brake cam to wheel axle center-center: 62 mm · Thread type: MF27.5x1 (fine pitch thread) · Thread length: 58 mm
EUR 251.60
Not in stock
Aquila seat red / white NOS | Piaggio SI
Manufacturer: Made in Italy · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Surface: varnished · Color: black · Color: red · Color: white · Spring-loaded: No · Lettering: Yes · Total length: 470 mm · Width: 130 mm · Width: 180 mm · Height: 80 mm · Number of fixing points: 6 pcs · Hole pattern [mm]: 25
EUR 184.10
Nos
Hot 
Seat "ciao" beige / red NOS | Piaggio SI
Manufacturer: Piaggio · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Surface: varnished · Color: beige · Color: black · Color: red · Spring-loaded: No · Lettering: Yes · Total length: 470 mm · Width: 130 mm · Width: 180 mm · Height: 80 mm · Number of fixing points: 6 pcs · Hole pattern [mm]: 25
EUR 184.10
Nos
Hot
Seat red NOS | Piaggio SI
Manufacturer: Piaggio · Material: Foam · Material: Imitation leather · Material: Sheet metal (steel) · Surface: raw · Color: red · Surface: varnished · Spring-loaded: No · Total length: 430 mm · Lettering: Yes · Height: 80 mm · Width: 130 mm · Width: 180 mm · Number of fixing points: 6 pcs · Hole pattern [mm]: 25
EUR 184.10
Collection only possible with online purchase and appointment.
