
Rear wheel hub for spoke rims of Puch Maxi S / N and Puch X30 Sport NG-2A mopeds / mopeds.
The bearings with M12 wheel axle are already installed and still lubricated with old grease from back then. We recommend disassembling, cleaning and relubricating the hub before use.
These ultra-rare hubs are from old stock and show some corrosion and scratches. However, they are the perfect base for polishing or painting.
Corresponding add-on parts such as wheel nuts, freewheel, brake anchor plate, brake pads etc. can be found in the accessories section.
NOS – New from old stock.
Original Puch spare part number: 349.5.41.803.1
| Manufacturer | Puch |
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Nut type: Hexagon nut · Height: 10 mm · Drive: External hexagon · Surface: galvanized (blue) · Nominal diameter (thread): 12 mm · Thread type: MF12x1 (fine pitch thread) · Thread depth: 10 mm · Width across flats: 19 mm · Strength class: 8
EUR 2.45
Nut M12x1 x 5.8 mm SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Nominal diameter (thread): 11 mm · Height: 5.8 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.20
swiing® ingenious wheel axle with bearing conversion kit rear spoke hub | Puch
Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Steel · Diameter: 29 mm · Ø outside: 29 mm · Total length: 190 mm · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Thread length: 29 mm · Thread length: 53 mm · Ø inside: 12 mm · Ø shaft: 19 mm · Shank length: 100 mm · Width across flats: 19 mm
EUR 47.90
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Ø External brake pads: 80 mm · Ø outside: 92 mm · Ø bore: 12.2 mm · Cranking (offset): 10 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Total length: 135 mm
EUR 92.20
ESJOT freewheel 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Manufacturer: ESJOT · Material: Steel · Color: silver · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Thickness: 15 mm · Surface: Hardened · Thread type: FG34.8 (1.37" 24G)
EUR 18.30
swiing® revival wheel bearing set M12x1 Ø 29 mm
Manufacturer: swiing® revival parts · Material: Steel · Ø outside: 19.9 mm · Ø outside: 29 mm · Height: 10.6 mm · Height: 14.15 mm · Surface: gas nitrided · Thread type: MF12x1 (fine pitch thread) · Ø inside: 25.85 mm · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Width across flats: 15 mm
EUR 54.00
Explore categories from Hub & axle
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Nipple length: 5 mm
EUR 2.95
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Drive: Slot · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.45
Nut M12x1 x 10 SW19 Wheel nut galvanized
Area of application: Standard · Material: Steel · Nut type: Hexagon nut · Height: 10 mm · Drive: External hexagon · Surface: galvanized (blue) · Nominal diameter (thread): 12 mm · Thread type: MF12x1 (fine pitch thread) · Thread depth: 10 mm · Width across flats: 19 mm · Strength class: 8
EUR 2.45
Union pedals plastic standard
Manufacturer: Union · Material: Plastic · Material: Steel · Color: black · Width: 77 mm · Height: 29 mm · Total length: 129 mm · Drive: Hexagon socket · Drive: Outer edge · Surface: rubberized · Thread type: FG14.3 (9/16" 20G) · Reflectors: Yes · Width across flats: 15 mm
EUR 15.90
Nut M12x1 x 5.8 mm SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Nominal diameter (thread): 11 mm · Height: 5.8 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.20








