Original, stainless steel rear mudguard for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A and Puch Sprinter moped / moped.
The polished surface and the high-quality workmanship ensure a first-class look and give your bead the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
The mudguard has all the original mounting holes, the cut-out for the air filter and the tabs for the cable routing.
Other parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Quality product from old stock of the Austrian manufacturer Puch.
Original Puch spare part number: 321.2.27.010.2
| Manufacturer | Puch |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | not folded, closed folded |
| Shape of the mudguard | partly round |
| Total length over ends | 640 mm |
| Scope | 1015 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 40 mm |
| Total height from support surface to top edge | 330 mm |
| Mounting type | Screws |
| Puch OEM number | 321.2.27.010.2 |
| Puch |
Ratings
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Thread type: M5x0.8 (standard thread) · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.50
Not in stock
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Manufacturer: swiing® revival parts · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Wheel size: 17 "
EUR 68.00
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Manufacturer: swiing® revival parts · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 635 mm · Mounting type: Screws · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Wheel size: 17 "
EUR 86.60
swiing® revival 17" mudguard set | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: chrome-plated · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Color: Chrome · Shape of the mudguard: partly round · Mounting type: Nuts & bolts
EUR 185.70
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Total length: 147 mm · Color: black-matt · Width: 105 mm · Height: 6 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
EUR 16.00
Rear fender (with dents) Inox NOS | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: Puch · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 640 mm · Scope: 1015 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 330 mm · Mounting type: Screws · Wheel size: 17 " · Puch OEM number: 321.2.27.010.2
EUR 241.50
Moped fans also bought
License plate holder (with frame) Inox (CH version)
Manufacturer: Made in Switzerland · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Total length: 143 mm · Width: 103 mm · Height: 7 mm · Mounting type: Nuts & bolts · Ø mounting hole: 5 mm · Number of fixing points: 3 pcs
EUR 16.70
Collection only possible with online purchase and appointment.
