High-end CNC aluminum transmission cooler for your moped / moped with Puch E50 engine.
Thanks to improved cooling, the clutch works more stress-free. However, this technical miracle also lowers the temperature at the cylinder head.
All components from your original engine can be used, only the cooling fin is fitted in between. Due to the different threads, you have a variety of connection options, such as a temperature sensor.
The following components are included in the scope of delivery:
1x cooling fin, black anodized aluminium
2x seal
1x aluminium bushing
3x O-ring seal
1x hose nozzle
1x circlip / retaining ring
4x countersunk hexagon socket screws M6 x 55 (fastening of cooler / coupling cover)
| Surface | anodized |
| Material | Aluminum |
| Color | black-matt |
| Width | 32 mm |
| Ø outside | 150 mm |
| Ø inside | 107 mm |
| Puch | E50 |
Accessories & related products
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Hot 
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 12.20
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Ø outside: 130 mm · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 184.50
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 9.10
PVL Analog Ignition Coil 105458 / 458115
Manufacturer: PVL · Place of use: External (outside the ignition) · Color: black · Ø mounting hole: 6 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 121.70
PVL stator "1443" ignition
Manufacturer: PVL · Material: Aluminum · Number of cables: 2 pcs · Color: black · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 121.70
Hot
GPO fuel tap horizontal M12x1 (with union nut) bottom outgoing | Puch Maxi S, N
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
EUR 12.20
Polini air filter BIG EVO Ø 28/35/42/45/49/55 mm oval / straight
Manufacturer: Polini · Material: Foam · Material: Rubber · Color: black · Color: blue · Width: 150 mm · Filter type: Foam · Height: 100 mm · Total length: 140 mm · Length rubber part: 13 mm · Ø Internal connection: 28 mm · Ø Internal connection: 35 mm · Ø Internal connection: 42 mm · Ø Internal connection: 45 mm · Ø Internal connection: 49 mm · Ø Internal connection: 55 mm · Mounting type: Plug connection clamped · Mounting type: Screwed clamp · Camouflaged: No · Area of application: Tuning
EUR 73.70
Working late? Evening hours on Thursday until 20:00
