Shaft seal oil seal (colloquially known as oil seal) with sealing lip made of PTFE (colloquially known as Teflon) with the dimensions 15/24/5 mm (15x24x5) for use on the crankshaft on your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
This radial shaft seal with fluorine rubber outer jacket is resistant up to a temperature of 200°C, whereas conventional NBR shaft seals are only resistant up to 100°C.
This radial seal ring made of FPM / FKM (commonly known as Viton) has an additional sealing lip made of PTFE, a material with a high thermal load capacity that does not interact with the lubricant and can therefore withstand the highest loads.
You can find more sealing rings for your Piaggio in the accessories section.
Quality product from the Italian manufacturer Polini.
Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Area of application: Racing · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
| Temperature resistance (min.) | -30 - 200 °C |
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Ø inside | 15 mm |
| Manufacturer | Polini |
| Material | FPM / FKM (colloquially known as Viton) |
| Place of use | Crankshaft |
| Surface | rubberized |
| Width | 5 mm |
| Ø outside | 24 mm |
| Area of application | Racing |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Malossi oil seal FPM 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Malossi · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized
EUR 17.10
Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Piaggio · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized
EUR 10.90
Explore categories from Seals & gaskets
Moped fans also bought
- 12 %
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
EUR 2.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Number of components: 2 pcs · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm
EUR 2.40
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 11 mm · Total length: 25 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 11 mm · Thread type: M7x1 (standard thread) · Manufacturer: CIF · Thread length: 19.5 mm · Number of components: 6 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 4.65
swiing® revival needle roller bearing 12/15/14.2 original
Bearing cage: Sheet steel cage · Ø inside: 12 mm · Manufacturer: swiing® revival parts · Bearing type: Needle sleeve · Width: 14.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 155 001
EUR 10.60
Polini oil seal FPM / PTFE 15/24/5
Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Shaft seal type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Polini · Material: FPM / FKM (colloquially known as Viton) · Surface: rubberized · Area of application: Racing
EUR 17.30
Collection only possible with online purchase and appointment.
